Meters: sense and display measures of gas, water, electricity, particles, vibration or light.

Showing results 571 - 585 of 5335 products found

  • SS100 / SS101 / Ss102 - LCR Meter

    Company: Sanshine Electronis

    Basic passive component testing equipment, can be used in quality management department or production process for quality inspection. Like as: transformer, inductor, resistor, capacitor, relay, motor, generator, electric valve, contactor, cable, wire, etc. Testing frequency: 100Hz, 120Hz, 1KHz.

  • LCR Meter

    Company: DER EE Electrical

    *Rs, Rp, Cs, Cp, Ls, Lp, phase angle, Dissipation factor, Quality factor *Auto select series or parallel test mode *Auto select 100Hz/1kHz/10kHz test frequency, 0.5V rms approx. *Calibration

  • LCR Meter

    Company: Daqarta

    The LCR_Meter mini-app macro included with Daqarta allows measurement of inductance (L), capacitance (C), and resistance (R), including Equivalent Series Resistance (ESR) of capacitors. Optionally, it can also show capacitor Dissipation Factor DF or inductor Q.

  • ALP-2811C - LCR Meter

    Company: ALP Technology

    Base on single micro-processor, using advanced 5 ports techniques and micro-processor corrected errors. * Impact protection, locking range and special zeroing function. * Easy operation, high stability

  • KH 100 Series - LCR Meter

    Company: Knohow Technology

    Functions :- L+Q, C+D, R+Q, Or Auto, |Z|+?, R+X, G+B, N+?, N-1+?, Vs+Vp, M, L+ALParameters Displayed: - Value, Difference, % DifferenceTest frequencies :-100Hz,120Hz,250Hz,500Hz,1kHz,2.5kHz, 5kHz, 7.8125kHz,12.5kHz,15.625kHz,25kHz,And an additional User defined from 500 possibleA Frequencies between 100 Hz and 25 kHz Depending on Model No

  • KT1008 - LCR Meter

    Company: Knohow Technology

    KH100 Series is also available in kit form. Kit includes complete assembled motherboard with or without LCD Display and Keyboard. LCD Display can be of bigger size to suite to main Enclosure. Keyboard being a simple layout can be changed to suite the Enclosure.

  • LCR Meters

    Company: Lutron Electronic

    Is a type of electronic test equipment used to measure the inductance (L), capacitance (C), and resistance (R) of an electronic component. In the simpler versions of this instrument the impedance was measured internally and converted for display to the corresponding capacitance or inductance value.

  • LCR meters

    Company: Shanghai Yi Hua V&A

    Auto LCR smart check and measurement19,999/1,999 counts dual LCD displayBasic accuracy: 0.3% with resolution of 0.01%Analog bar displayMeasurement frequency up to 100KHz Mini-USB interface (VA520B only)Sorting functionRelative measurementData holdBack light, full angle for LCD display4-terminal measurement configurationAutomatic power offBattery and external power supplyBattery voltage indication

  • SS1061 / SS1062 / SS1063 - LCZ Meter

    Company: Sanshine Electronis

    Test system for passive components designed for the use in electronic inspection or production process for quality control. Like as: transformer, inductor, resistor, capacitor, relay, motor, generator, electric valve, contactor, cable, wire, etc. Test frequency: 40Hz-200kHz.

  • MF500M - Magnetite meter

    Company: Diverse Technologies

    * Measures magnetite effect * Ideal for use with cooling pipes * Rugged probe for extra protection * Auto Zero facility * Smart instrument able to estimate degree of occlusion * Supplied with a protective carrying case and full user instructions.

  • Lux Meters

    Company: Shenzhen Everbest

    Unit of illuminance and luminous emittance, measuring luminous flux per unit area. It is equal to one lumen per square metre. In photometry, this is used as a measure of the intensity, as perceived by the human eye, of light that hits or passes through a surface.

  • Lux Meters

    Company: Lutron Electronic

    Light measurement system.

  • LS-160 - Luminance Meter

    Company: Konica Minolta Sensing

    Features of this instrument include an optical system with single lens reflex (SLR) technology that will give you accurate targeting capabilities while being able to see at all times the specific measuring area in the viewfinder, even when measurements are being taken at very short distances. Extremely small areas can be measured, even down to 0.4mm in diameter (when a close-up lens is used). With these and other advanced functions, even those using the device for the first time will achieve highly accurate measurement results. The clear backlit LCD screen shows the values of luminance measurements, and the values are also visible in the viewfinder. This means measuring tasks do not require moving the instrument from the eye yet still affording precise control of the object being measured. When measuring particularly bright light sources, comfort and safety are assured with the LS-160’s neutral density eyepiece filter. The automatic mode sets the measurement time according to the brightness of the target. In all measurement operations, the device’s pistol grip provides for a solid, secure hold.

  • LS-150 - Luminance Meter

    Company: Konica Minolta Sensing

    The LS-150 series uses a single lens reflex (SLR) optics system that provides users with several important capabilities. The SLR allows highly accurate targeting of light sources. Very small areas, even down to 1.3mm (when close-lens is used), can be measured accurately. Measurement areas at distances both long and short show up consistently in the viewfinder. This flexibility allows even those who have never used the instrument to gather precise measurement results. The value of the measured luminance is easy to read on the clear backlit LCD screen and also on the bright viewfinder. With this capability, the instrument allows the user to never have to move the instrument from the eye while still perfectly controlling the measured object. The automatic mode sets the measurement time according to the brightness of the target. When measuring light sources that are particularly bright a neutral density eyepiece filter makes the job safe and comfortable. In all measuring tasks, our uniquely designed pistol-type grip provides for a secure hold on the instrument.

  • L 1009 - Luminance Meter

    Company: LMT Lichtmesstechnik

    Angular fields 3°, 1°, 20', 6' selectable. Photometer head with Si-photoelement, fine V(lamda)-approximation. Measuring distance approx. 0.50 m to infinity.

Products

Applications

Manufacturers