Filter Results By:

Products

Applications

Manufacturers

Meters

sense, display, measures; gas, water, electricity, particles, vibration, light or quanta.

See Also: Sensors, Measurement


Showing recent results 1396 - 1410 of 4310 products found.

  • 2 in 1 Power Meter

    OT-2000-V - Radiantech, Inc.

    The FTTx Wide Band VFL Meter, OT-2000-V, is a powerful optical measuring tool which can be used in various optical fiber systems and applications, especially in FTTx field installation and maintenance. With 850, 1310, 1490, 1550 nm calibration wavelength, it is ideal for both single mode and multimode fiber field installation and maintenance. The additional 650nm light source makes for a convenient, easy to use yet powerful device to check for broken fibers as well.

  • Multichannel Resistance Meter

    CHT3541X - HopeTech

    The CHT3541X is a band new design multi-channel resistance meter with high precision, wide measurement range and compact plug-in card design. The customer can configure a capture card or alarm card according to the different meets. Each test card can scan and test 8 channels resistance. The CHT3541X adopts high performance ARM micro processor control design. 48 channels of resistance can be indicated simultaneously in the true-color 4.3 inches LCD display and each channel can set the comparator separately.

  • Bench Type Panel Meter

    Standard Electric Works Co., Ltd

    Precision meters for plant maintenance, field servicing and educational purposes.● Taut Band movement with rectifier type.● Multi terminals (4mm socket) for range selection.● Carbon pointer, mirror scale to eliminate parallax error.● High resistance to shock and vibration.● Accuracy:±1.5% F.S.● Scale length:80mm.● Dimension:107(L) × 117(W) × 53(D)mm.● Weight:Approx. 300g.

  • Signal level Meter

    Terryscan 2 - Swires Research

    The Spectrum mode enables viewing of the full VHF-UHF band (or any part of the band) in real time and allows fast checking to ensures that all channels are available. This is much quicker than looking at individual channel readings on a conventional meter and allows the rapid identification of cable and connector problems. Favourite settings may be stored for rapid retrieval. The spectrum display also has a peak hold function, very usefull for tracking intermittent interference including that from the 800 MHz LTE band.

  • Partial Discharge Meter

    TMG - Mess- & Prüfsysteme GmbH

    The partial discharge meter TMG was developed for testing according to VDE 0434 and IEC 60270. It offers neat grouping and easy use of the operation elements. The following features are available: Narrow band filter with a variable frequency from 0,1 bis 2,5 MHz. Wide band filter 40-250, 40-400, 80-250, 80-400 kHz. PD measuring range von 2,5 pC bis 25000pC (Option 100 000pC).

  • Rope Tension Meter

    RTM - Gigasense

    The PIAB RTM Rope Tension Meter is very simple and handy to use. Simply hold and “clip” it to the rope to be tested and use the large hand screw to deflect the rope to a fixed angle. The resultant force will affect the load cell and measure the tension in the wire rope. The resultant signal is digitally processed and displayed in a selected pre programmed graduation. The PIAB RTM 20D can be graduated in kN, klbs or in ton.

  • Fiber Optic Power Meter

    VPM-26 - ViewTEQ Electronics

    The VPM-26 is a reliable and easy-to-use optical power meter for accurate testing of CATV and Telecom single mode as well as LAN multimode fiber systems. With a measurement range of +26 to -50dBm, the VPM-26 is particularly suited for performing measurements on CATV optical transmitters, EDFAs and fiber nodes. For field application, it has a large LCD read out and 240 hours of continuous use.

  • Terminal Power meter

    TPM-50 - ShinewayTech

    ShinewayTech? TPM-50A Terminal Power meter can test (1) Average power range: -40 dBm~+20 dBm;(3) Modulation bandwidth: 5MHz;(3) Continuous signal and burst signal test. Highly accurate power measurement CW and digital modulated signal (For example: GSM/EDGE, CDMA/EV-DO, WCDMA/HSDPA, WiMAX, and TD-SCDMA). It is very important to test that if the transmitter is at a specified level or not. For example, the tester needs to test the output power of base station. Because the lower output power produces the larger coverage area to cause call interruption.

  • Electronic Brake Meter

    VI & 2000 - Bowmonk Ltd.

    Bowmonk Electronic Brake Meters are the most up to date and versatile instruments available for brake and skid testing, road traffic accident investigation and reconstruction and vehicle safety inspections. The units are MOT approved. The units are portable, easy to use and produce a hard copy evidence of the test results on a built-in printer. All results are time date stamped and additionally the vehicle and examiner identification can be included.

  • PON Power Meter

    P100 - UC Instruments, Corp.

    The CARY-P100 PON Optical Power Meter was design for the FTTx application and maintenance which not only can be used to test and estimate the PON signals at the same time, but also the normal power measurement and fault identification. It is a useful, essential and ideal tool for the construction and maintenance of the PON projects.. Long life battery power provides more than 8 hours outdoor test capability.

  • Leakage Current Meter

    SA10i - Scope T&M Pvt, Ltd.

    SA 30i and SA 10i the Leakage Current Analyser and Leakage Current Meter from SCOPE are two state of the art on-line test system for Residual Life Assessment of metal oxide (Zno) Surge Arresters. The instrument measures and directly displays the values of resistive and total leakage current. it is capable to work accurately and safely in swithchyard upto 765kV.

  • UHF Installers meter

    Terry - Swires Research

    A new design, a new concept! Ease of use was the main design goal for'Terry' the Terrestrial UHF meter. View up to 8 carriers simultanously -whether they are Analogue or Digital. Featuring analogue and digital terrestrial auto detection and measurement. View the spectrum, level and quality information simultaneously, no need to step through channels, save time every time!

  • Universal Input Digital Meter

    L40 Series - Weschler Instruments

    The Laurel L40 Universal Input Digital Meter has 65 user-selectable analog input signal types and ranges. These include DC voltage and current, AC RMS voltage and current, process signals (4-20 mA, 0-10V), thermocouple (10 types, °C or °F), RTD (6 types, °C or °F), thermistors (NTC or PTC), resistance (0-5k or 0-50k ohms), and potentiometer inputs.

  • Waterproof Pen-type pH Meter

    KL-03(III) - Kelilong Electron Co.Ltd,

    KL-03(III)Waterproof Pen-type pH Meter *Large and easy-to-read LCD*Replaceable pH electrode*Waterproof design*Data holdTechnical Specification Model KL-03(III) Measuring range 0.00~14.00PH Accuracy ±0.1PH Resolution 0.01PH Operating Temperature 0~50.C Automatic Temperature Compensation 0~50.C Power Supply 4X1.5V(AG13) Dimensions 188X35X35(mm3)

  • UV Energy Meters

    Shenzhen Linshang Technology Co., Ltd.

    Linshang Technology, as a national UV Energy Meter manufacturer, which provide many kinds of instruments used to test the UV energy emitted by UV curing lamp,has the LS120 used to test the traditional mercury lamp and the LS128 used to test UV LED.These two instruments can help you test energy, power, temperature and time at the same time,can display curve,expert data and print test report.The performance can be compared with the American EIT and the Japanese ORC.