Meters: sense and display measures of gas, water, electricity, particles, vibration or light.

Showing results 1411 - 1425 of 4381 products found

  • DS2400 Series - QAM Analysis Meter

    Company: Deviser Instruments

    The DS2400 series QAM analysis meter is mainly used for construction, installation and maintenance of HFC plants. This compact device offers QAM and analog measurements with a simple user interface. The long battery life allows the user to turn up networks all day and get their job done efficiently.

  • 3030 - PMR Power Meter

    Company: LBA Group

    The PMR Power Meter from LBA Technology is a very versatile instrument covering most of the PMR bands available. The PMR Power Meter is capable of measuring forward and reflected power in the range of a few milliwatts up to 500 Watts. The internal operating system controls measurement, display and the I/Os allowing serial communication to PC, USB to memory stick and USB Serial communication. The I/O options are used to write plots to either memory sticks or to a connected PC, the I/Os can also be used to operate the instrument, giving commands and receiving data. For documentation reference the instrument has a real time clock. Multilayer menus are used to setup and control the operation of parameters. The PMR Power Meter instrument is small, handy and light weight battery operated with more than 5 hours of continuous operation on the internal NiMh cells. Feature with XML data handling and application viewer is included. Accessory kit with soft carrying bag, car charger and coax adapters for standard types.

  • SMG2000B - Clamp Phase Meter

    Company: Wuhan Huatian Electric

    SMG2000B Double Clamp Digital Phase Meter is special designed for voltage, current and phase tests, it is in high-precision, low price, portable hand-held, dual-channel input measuring. It's easy to measure the phase between U-U, I-I and U-I, identify the inductive circuit ,capacitive circuit and the phase sequence of three-phase voltage, detect the wiring group of transformer, test the secondary circuit and bus differential protection system, display the phase relationship among the CT groups of a differential protection system, and check if the wire of electric meter was correctly connected. When testing customers do not need cut off the tested current which input by slip core current transformer. When measuring the phase between U1 and U2, the two input circuit loop are completely isolated, so the possible misconnection is absolutely avoided, which may result in short circuit and may even burn the meter. The monitor of the device is high-contrast LCD screen, and the character in which could be as high as 25mm, and can be freely rotated approximately 70 °, which helps to obtain the best visual effects.

  • SMG2000E - Clamp Phase Meter

    Company: Wuhan Huatian Electric

    SMG20000E Clamp Phase Meter is special designed for voltage, current and phase tests, it is in high-precision, low price, portable hand-held, dual-channel input measuring. It's easy to measure the phase between U-U, I-I and U-I, identify the inductive circuit ,capacitive circuit and the phase sequence of three-phase voltage, detect the wiring group of transformer, test the secondary circuit and bus differential protection system, display the phase relationship among the CT groups of a differential protection system, and check if the wire of electric meter was correctly connected. When testing customers do not need cut off the tested current which input by clamp-current transformer. When measuring the phase between U1 and U2, the two input circuit loop are completely isolated, so the possible misconnection is absolutely avoided, which may result in short circuit and may even burn the meter. The monitor of the device is high-contrast LCD screen, and the character in big size, which helps to obtain the best visual effects.

  • JW3217 - Optical Power Meter

    Company: Shanghai Joinwit

    JW3217 Optical Power Meter is a multi-channel desktop design Grenville developed high-precision, wide-range optical power testing equipment. Intelligent microprocessor control, with automatic range switching, optical detector PIN tube over the entire range, were linearized points and seven segments, eliminating the PIN diode at the same wavelength, different power, light power error caused by nonlinear response, which greatly improved the accuracy and reliability of the equipment detected.In addition to the functions of a traditional power meter, JW3217 also uses a new data acquisition technology, so that the power meter has a greater signal to noise ratio, greater dynamic range. When small signal, the internal circuit to avoid the use of small resistive screen technology, making JW3217 higher sensitivity, power display value -75 ~ + 3dBm.JW3217 also provides RS232 communication function, use JW3217 the included PC software provides users with a friendly and convenient interface to meet the power monitor, enabling unattended, paperless recorders, automatic data storage requirements.

  • MR3 - Magnetoresistive Milligauss Meter

    Company: Alpha Lab

    The MR3 Magnetoresistive Milligauss Meter measures and displays the three vectorcomponents (X, Y, Z) as well as the magnitude (M) of the static magnetic field. Update is two times per second. The three sensors are in a 25 mm (1") cube at the end of a flexible 100 cm (40") cable. It can be powered by 4 AA batteries (included) or a Worldwide AC adaptor (included). It can collect and store data (X, Y, Z and M) for later download or stream data live via USB connector. Both the instantaneous values of X, Y, Z and M, and their peak values, are displayed on the meter screen. "Peak" values are the highest values seen since the peak reset button was pressed. Maximum error of sensitivity is +/- 0.5 % of the reading, and the maximum error of the offset is +/- 0.50 milligauss. Range is +/- 1999.99 milligauss with resolution 0.01 milligauss (or 1 nT) over the full range, displayed simultaneously for X, Y, Z and M.

  • SY027 - Meter Pulse Splitter

    Company: Synectic Electronics

    The SY027 is designed to convert pulses from meters or other turbine devices and transmit the same pulse via two relay outputs to enable two separate instruments to measure the rate simultaneously. It can be used with electricity, gas, or water meters. The SY027 PSO has been designed for applications where a pulse is required to be isolated, re-powered and repeated on two separate outputs. It works with inputs from reed switch signals,Opto coupler, open collector, NAMUR or TTL pulse (up to 25V) with automatic debounce, as well as with high frequency pulses . The speed of pulses can be accommodated from very slow to super-fast.The standard frequency range is up to 1 kHz and a maximum switching voltage of 280V, we also have an extra fast version for a small extra charge we can reproduce pulses up to 5 kHz with a maximum switching voltage of 60V.

  • CS-150 - Luminance and Color Meter

    Company: Konica Minolta Sensing

    The CS-150 color and luminance meter can measure nearly any type of light source, indoors or outdoors. The CS-150 is incredibly precise, designed for portability, and minimizes measurement time. It serves the same purpose as the LS-150, but with the added bonus of a color measurement option. The CS-150 luminance and color meter has an optical system that allows precise targeting and ensures that the viewfinder shows the exact area to be measured, even up close. The bright viewfinder on the CS-150 shows the measured luminance value field as well as the measurement environment. It also has a unique optical design which is optimized to reduce flare. The automatic mode automatically sets the measurement time according to the brightness of the target. With numerous options available including close-up lenses for extremely small measurement areas, the C-mount CCD camera adapter which enables the viewfinder to be monitored from a distance, and the illuminance adapter which allows measurement of illuminance the CS-150 is an all-inclusive colorimeter.

  • 368 FC - Leakage Current Clamp Meter

    Company: Fluke

    The Fluke 368 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line. The Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

  • 369 FC - Leakage Current Clamp Meter

    Company: Fluke

    The Fluke 369 FC true-rms leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime, and identifying intermittent GFCI and RCD trips, all without taking equipment off line. The Fluke 369 FC has an oversize 61 mm jaw for work with extra-large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

  • CM55 - 1000A AC Clamp Meter

    Company: Martindale Electric

    The CM55 is a pocket sized high performance AC Clamp meter measuring AC current, AC/DC voltage and resistance with continuity test. The compact rugged design enables accurate and reliable current measurement down to 10mA resolution without the need to break into the circuit.The CM55 has a CATIII 600V safety rating and is the ideal tool for residential and commercial electricians.

  • Super Buddy - Satellite Signal Level Meter

    Company: Applied Instruments

    Complete more installs faster and better using the Super Buddy satellite finder meter. Be "sure of your bird" with the positive ID feature or use the automatic scan to identify the unknown satellite. The Super Buddy's geo-sensitive "Field Guide" shows you just the birds visible to your install -- ALL of them, with their individual transponders. The Super Buddy even gives the elevation and azimuth for whichever satellite you select.

  • FlashRES-64 - 61-channel Resistivity/IP meter

    Company: ZZ Resistivity Imaging

    FlashRES-64 is our budget-level resistivity and IP meter. It is extremely fast, versatile, and cost-effective compared to other systems. FlashRES-64 is fast and has 61 channels. It has the ability to acquire multiple data arrays in a single run, and the capacity to collect over 62k data points within an hour. FlashRES-64 is versatile. Besides surface survey, it also specialises in cross-hole, surface-points-points, surface-borehole, and 3D surveys.

  • Statometer II - Field Intensity Meter

    Company: Haug

    The field intensity meter Statometer II is either available with analog or digital display. It isintended for the measurement of electrostatic charges, fields and potentials. This convenient measuring unit is a precision instrument which is suitable for use both in the laboratory and directly at the machine. The measuring head is connected with the base unit by means of a coiled cable. This allows measurements to be performed on running machines.

  • ST-3370 - Field Optical Multifunction Meter

    Company: Wuhan Sunma Technologies

    is a multi-function test instrument gathers functions of optical fiber telephone, optical source and optical power meter. Working as a kind of optical fiber installation and service equipment, it is used for optical fiber line communication and test, carrying out optical fiber working mode judgment. It also has optical fiber identical function and it measures easier. The advanced built in non-easy lost memory can save up to 500 pieces of test data for convenient checking.

Products

Applications

Manufacturers