Showing results 2101 - 2115 of 5075 products found

  • C-BERT 2830-4 - Bit Error Rate Tester

    Company: Munich-Instruments

    The C-BERT 2830-4 is a complete bit error rate tester dedicated for 100G Ethernet driving EMLs, VCSEL and optical modulators direct. Four independent high voltage output channels eliminate the need of external amplifiers and Bias-T circuits. The cross point alignment feature enable optimization of the optical output. The BERT eye scan reveals low-probability events and shows the true performance of the DUT to aid troubleshooting. The OS independent GUI is easy to install and enable remote control from everywhere. The compact C-BERT 2830-4 is a powerful, time saving and cost efficient solution for 100G Ethernet TOSA testing.

  • C-BERT 2810-4 - Bit Error Rate Tester

    Company: Munich-Instruments

    The C-BERT 2810-4 is a complete bit error rate tester dedicated for 100G Ethernet applications. The four independent channels enable an actual operating environment with traffic on all lanes. The simultaneous testing of 4 channels is much faster than testing each channel individually saving time and money. The BERT eye scan reveals low-probability events and shows the true performance of the DUT to aid troubleshooting. The high RF port density eliminates long cable length which degrades the signal at 25 Gb/s. The OS independent GUI is easy to install and enable remote control from everywhere. The complete and compact C-BERT is a powerful and cost efficient test solution for 100G Ethernet.

  • BT-570F - BATTERY LOAD TESTER

    Company: DURST Motor & Electric

    Single meter with rocker switch between volts and amps makes this unit a compact, powerful tester. High rate accurate discharge through heavy duty carbon pile load rheostat. Suitable for 6 and 12 volt batteries. New heavy duty cables with an in-built trace wire for high accuracy. Spiral cable protectors, fully insulated covered booster clamps for maximum safety and protection. Vented steel cabinet, carry handle. Internal cooling fan. Volts 0-16 volts Amps 0-1000 CCA, 0-500 amps, 0-150 amp/hour.

  • SRT-6100 - Surface Roughness Tester

    Company: Guangzhou Landtek

    This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.

  • 312F - Surface Temperature Tester

    Company: Martindale Electric

    Model 312F is built for rough industrial use without any lessening of accuracy. The bimetallic sensor is a specialty processed alloy that is conditioned and tested for permanent calibration and maximum stability. Recommended primarily for temperature measurement of electric motors and generators, bearings, etc., this tester can be used for checking any other surface within the range of 0° F to 250°. Calibration is for use in an ambient temperature of about 70° F. Higher or lower surrounding air temperatures will result in slightly higher or lower readings. Three minutes should be allowed for the instrument to reach full stability when taking a reading.

  • ADSE 746 - Pitot Static Tester

    Company: ATEQ Aviation

    The ADSE 746 caters fully for all aircraft types and the different electrical power supplies. It can be used for testing high performance civil and military aircraft, fixed and rotary wing. Themulti-pressure outlets option can suit themore complex pilot-staticsystems.This Pitot Static tester is designed primarily for flightline use to cover the testing of all barometric and manometric pressure instrument systems. The large touch screen display, with on-screen help, enables all checks to be carried out easily on the flight deck or in the cockpit, by a single operator. The test set is robust and housed in a mobile weatherproof case fitted with tire wheels. An attached bag contains the pressure hoses and electrical cables.

  • HR1500 - Rockwell Hardness Tester

    Company: Testech Group Co

    HR1500 can be used directly to measure Rockwell hardness for metal and plastic material.· Provided with many features such as high measuring precision, wide measuring range with 15 Rockwell scales.· Automatic test force switch according the selected scale without manual operation.· Automatic load cycle. The loading, dwell, unloading process of the main test force are controlled exactly to meet standard.· Measuring results digitally displaying and can be printed, or transmitted to external computer automatically.· The tester is suitable for testing of carbon steel, alloy steel, cast iron, non ferrous metal, and engineering plastic etc.· Test value can be transformed to the value of HB, HV, HLD, HK and σb value.

  • MBT 1000 - Roller Brake Tester for Motorcycle

    Company: Maschinenbau Haldenwang

    Communication desk, consisting of stable metal housingCabinet for test stand controlLockable drawer for keyboard and PC mouse with storage compartment for writing accessories etc.Monitor mount prepared VESAMeasured values, differential display and graphics on a PC monitor (optional)LON USB card car Euro system allowing connection of EURO-floor groups and external devices (BFT / 3M SE-402 / MDO2 export / Four gas tester, in conjunction with the connection module), incl. Terminal software and software module for MBT 1000/2000 / MSD 3000 / MINC / -EURO)Railing with mounting holes for panel

  • Rotary Abrasion Tester

    Company: Qualitest International

    Our Rotary Abrasion Tester is a cost-effective, easy to use and high quality instrument,compared to Taber®* Abraser used to cover a wide spectrum of materials (including plastics, coatings, laminates, leather, paper, ceramics, carpeting, safety glazing, etc.) and is built in conformance to ASTM C501 / C1353 / D4157 / D1044 / D3389 / D3451 / D3730 / D3884 / D4060 / D4685 / D4712 / D5144 / D5146 / D5324/ D6037 / D7255/ F362/ F510/ F1478/ G195/ F1978, TAPPI T476, as well as many other International DIN, MIL, EN, BN, ISO, JIS, SAE, BS, and ANSI standards.

  • 4100-D - Small-Signal Discrete Tester

    Company: Aemulus

    Fastest discrete tester in the industryUnmatchable test time of <40ms for transistors and <20ms for diodesTrue multi-site testing, up to unmatchable 127 simultaneous sites with >95% efficiency Modular and highly scalable design, don’t pay for what you don’t need (for now) Seamless extension of test resources and test sites, add-on whenever you need Flexible tester-handler configuration – index-parallel, test-time division, multi-sites on single handler, etc Independent test flows running on one screen for independent tester-handler operation Industry’s leading discrete vectorization (AVEC-D) to optimize test time and eliminate O/S latency

  • KT-6000 - PAUL Aerospace Tester

    Company: Konrad Technologies

    We developed our standard Aerospace Test System KT-6000 “PAUL“ to meet the specific requirements of the aerospace industry. The system is designed against the backdrop of its usability as a complete system tester, which can be adapted to the respective test requirements of various devices under test (DUT) using different test unit adapters (TUA). Besides standard ATE functionality, the system supports the integration of test equipment for*Acceptance Test Procedures (ATP)*Highly accelerated life testing (HALT)*Environmental Stress Screening (ESS)*High Accelerated Stress Screening (HASS)

  • Serie DY-2 - Pull Off Tester

    Company: PASI Srl

    The DY-2 FAMILY of automated pull-off testers covers the complete range of pull-off applications with unmatched ease of operation and a unique capability to store a complete record of the test.Pull-off testing is one of the most widely used test methods in the construction industry. This is reflected in the huge number of standards dedicated to the method.It has long been known that one of the major influences on the result of a pull-off test is the operator influence in the application of a constant load rate. The DY-2 with its integrated, feedback controlled motor removes this variable completely, by providing a fully automated test at a constant load rate which can be verified.

  • Pendulum Impact Testers

    Company: Qualitest International

    Qualitest offers Charpy / Izod Impact Testers with capacities up to 800J meeting and exceeding ASTM E23, ISO, DIN, JIS, ISO standard requirements. The key benefits of this line of top technology models are price competitiveness, extremely high precision and durability, automatic motorized lifting of the pendulum hammer to optimize cycle times, flexibility, efficiency for low/high temperature testing, and much more. Optionally we offer temperature chambers, automated sample handling, centering device, Charpy sample preparation and broaching machines for preparation of notched bar specimens.

  • Portable Small Meter Tester

    Company: Badger Meter

    The Portable Small Meter Tester (PSMT) is a lightweight system for field testing of 5/81 in. meters. It includes a test meter with control valves, hose connections, fittings and pressure gauge. Meter tests can be done without removing them from service. The inlet control valve ensures an accurate test start and stop. A globe valve downstream from the meter allows flow rate adjustment during test. Connection to the PSMT is made using standard 3/4 in. male hose connections located on the exterior of the case. Two 3/4 x 39 in. metal-reinforced flexible hoses are provided for easy field connections.

  • TAG-8000 - Wireless High-voltage Phasing Tester

    Company: Wuhan NANR Electric

    TAG-8000 Wireless High-voltage Phasing Tester , used in power lines , substations and phase sequence phase checksum verification , with nuclear phase , phase sequence , electrical inspection and other functions with a strong anti-interference, compliance (EMC ) standards, adapt to various electromagnetic interference occasions . High voltage phase signal will be measured by the collector out emitted directly after the treatment . Received by the nuclear phase and the phase comparison , the results for the nuclear phase characterization. Because TAG-8000 Wireless high-pressure nuclear phase meter is a wireless transmission , thereby achieving safe, reliable, fast and accurate , adapt to various nuclear phase occasion.

Products

Applications

Manufacturers