Filter Results By:

Products

Applications

Manufacturers

Testers

find the limits of a design.

See Also: Test, Testing, Audio Testers, Automotive Testers, Battery Testers, Cable Testers, Component Testers


Showing recent results 3436 - 3450 of 4714 products found.

  • BT-3915 Battery Tester/Resistance Conductance Tester - Kongter

    BT-3915 - Kongter Test & Measurement Co., Limited

    The excellent performance of BT-3915 for testing cell internal resistance/conductance and voltage will help you eliminate the weak batteries and ensure their performance. - Model:  BT-3915 Battery Tester- Parameters measured:  Cell resistance, conductance and v-oltage- Battery Capacity: 5~6000Ah- Resistance Range: 0.00mΩ~ 100mΩ - Voltage range: 0 – 16 VDC- Application:  Utility, Telecommunication, Data Center (UPS), Motive Power

  • Automatic High Voltage Wire Harness Testers

    MK Test Systems Ltd.

    Automatic high voltage wire harness testers are used in a variety of industries, such as aerospace and defence through to rail, and are used to test any equipment which contains a high number of electrical wires, or active components ensuring these pass specified test criteria at the sub-assembly and final stages of construction. These systems ensure the wiring and components are 100% compliant and undamaged, recording every test measurement and aiding diagnosis of detected faults.

  • Horizontal Dedicated Friction Peel Tear Tester

    FPT-H1 - Mecmesin Limited

    The FPT-H1 is a dedicated horizontal tester, designed for testing to all the key industry and international standards for coefficient of friction, and for appropriate horizontal peel and tear methods. Its sleek contemporary styling incorporates ease of use and maintenance. Built to exacting standards, yet affordable, the FPT-H1 provides the most accurate and detailed measurement, with guaranteed repeatability in testing. It is ideally suited for the packaging industry, for manufacturers, converters and users of paper, board and plastic films, plus coatings, floor coverings and textiles.

  • Fuel Hose Assembly Tester - Basic, USAF

    9901-10FHT - Hydraulic Technology, Inc.

    The basic fuel hose assembly tester is utilized by those users who do not require the complete 9201A test system which includes all test adapters and components required by U.S. Air Force PD 89MMI638. The 9901-10FHT however includes the identical test pump, manifold and controls and with larger valves, ports and fittings for increased fluid flow, is designed for the identical mission of testing fuel hose assemblies. Maximum pressure is 1000 psi allowing better control resolution at lower test pressures.

  • 125M to 11.4Gbps Bit Error Rate Tester

    Eye-BERT Gen2 - Spectronix

    The Eye-BERT Gen2 builds on our original Eye-BERT, adding extended data rates, mixed mode testing capability, and a color touch screen.  The extended data rate allows for testing of links in the 125Mb to 11.4Gb range all in a single unit.  The Eye-BERT Gen2 offers high performance stand alone bit error rate testing at a fraction of the cost of competing testers. Its small size and stand alone operation allow for convenient field testing of SFP and SFP+ transceivers as well as link verification and performance testing all in a single unit.

  • Economic, Single-Channel Eddy Current (ECT) Testers

    MINIMAC® 50 & 55 - Magnetic Analysis Corp

    *Affordable, compact ECT testers offer high performance at a low cost.*Both designs operate at speeds over 4000 f.p.m. (with standard coils), take up less space, and do not require cooling. (Higher speeds achievable with wide-spaced coils)*Detect short surface and some subsurface defects in tube, bar, wire and rod.*Designed with software controls for all functions including phasing,filtering and sensitivity.*Full-color polar and linear monitor displays of real time, true wave form signals.*Enable on-site or remote location review.

  • HCAI-1 High Current Arc Ignition Tester

    HCAI-1 - Lisun Electronics Inc.

    The HCAI-1 High Current Arc Ignition Tester is according to IEC 60950-1:2001, BS EN 60950-1:2001, BS 7002:2000, GB 4943.1-2011and UL746A, IEC60947.1: 1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-2008 and other standards required simulated safety test project. Parts and components of insulating materials or other solid combustible materials that are prone to flame spread in electrical and electronic equipment may ignite due to proximity or contact with electric arc, causing electrical fire and endangering the reliable operation of equipment and personal safety.

  • Shaft Voltage Tester™ Digital Oscilloscope

    AEGIS® - Electro Static Technology

    Digital Oscilloscope and Multimeter with Conductive Microfiber Probe Tips. Is your motor safe from destructive shaft voltages? For the first time you can get all of the tools to find out in one place. The AEGIS® Shaft Voltage Tester™ Digital Oscilloscope bundle includes the AEGIS-OSC-9100 100 MHz digital osciloscope, shaft voltage probe tips, and a shaft grounding simulator. Armed with these tools, you can quickly and easily find whether your motors are at risk of premature bearing failure due to VFD-produced bearing currents.

  • 1 to 116Gbps Bit Error Rate Tester

    Eye-BERT 100G - Spectronix

    The Eye-BERT 100G is a low cost, full-featured, stand-alone communication test set with an integrated post equalizer eye opening monitor / scanner. Ultimate flexibility is provided with three different physical interfaces, 13 different configurations, and configurable transmit and receive clocks. The tester supports PRBS patterns up to 263-1 and select data rates from 1.25 to 29Gbps on up to 4 simultaneous channels. Front panel controls are also provided for stand-alone operation. Unlike competing products, fast post equalizer eye monitoring and scanning is included and can be performed on any input channel above 5Gbps.

  • ADSL / 2 / 2+ Handheld VoIP Tester

    QuickTest 500 - Vonaq Ltd

    *Rapid Testing. The QuickTest 500 ADSL2+ Tester's automatic Service Verification Test Suite starts as soon as you switch on (results are typically obtained in less than 3 minutes)*Simple to use. Virtually no product training required with QuickTest 500 ADSL Tester*Configurable Pass / Fail Indicators on the LCD display and clearly presented in multi-colour LEDs on the front panel*No need to get a laptop out*Save and name up to 16 test results at any one time*Line Voltage LED indicates poor, missing or excessive Line Voltage*ADSL/2/2+ Test LEDs to indicate if ADSL Showtime achieved*In Service LED indicates problems with PPP or IP layer*LEDs to indicate problems with the Trained Line Rate, poor Noise Margin or excessive Line Attenuation

  • 9.9 to 11.4Gbps Bit Error Rate Tester

    Eye-BERT Micro 10G - Spectronix

    The Eye-BERT Micro 10G is a low cost, easy to use, all-in-one XFP based fiber optic test solution offering high performance bit error rate testing at a fraction of the cost while providing a rich set of features not found in other bit error rate testers. Features include: variable bit rate, user programmable patterns, diagnostic monitoring, and wavelength tuning (per XFP capability). Additionally, with a click of a button, the Eye-BERT Micro 10G will automatically test an XFP module based on the information it reads from the transceiver and generate a detailed test report complete with manufacturer, part number, serial number, date code, fiber type, link length, speed, and test results. The Unit is supplied with anti-skid bumpers and is small enough to be integrated into larger systems for dedicated link verification.

  • Digital Ior Leakage Current Clamp Tester

    MCL-400IR - MULTI MEASURING INSTRUMENTS Co., Ltd.

    About Ior Leakage Current Recently, the leakage current clamp meter is widely used for insulation control of low voltage circuit as the supplementary method of the insulation resistance measurement. The control of leakage current has the advantages to enable the prediction of insulation condition in the electrical power line without having to shut off the power. The leakage current (Io) includes the capacitive leakage current (Ioc)originated in the capacitance and the resistive leakage current (Ior) originated in the insulation resistance each related to the ground. It is considered that the measurement of resistive leakage current (Ior) is the very useful and effective method for the insulation control of low voltage circuit. However, it was difficult to measure the resistive leakage current (Ior)with traditional leakage current clamp meter. MCL-400IR new digital clamp tester enabled the measurements of the resistive leakage current (Ior)without voltage input(phase detection).

  • 0-500 Amp carbon variable load Tester

    6042 - Associated Equipment Corp.

    Designed with the highest quality and versatility in mind. Interprets data from the charging/starting system on easy-to-read LED display voltmeter and ammeter. Also shows +/- Amps for easy diagnosis of current leakage problems.

  • 12 Plug Pro Audio Cable Tester

    PCT40 - Pyle Audio Inc.

    Enables quick convenient continuity cable testing for all type of cablesLED's confirm each conductor continuity and connection6-Way Switch for selecting connections to be testedIncludes internal battery and ground connection status checkRugged, compact, metal construction for long life and reliabilityTests cables with all types combinations of the following connections

  • 16 OZ. COMBUSTION LEAK TESTER FLUID

    AC560500 - Matco Tools

    *16oz. Bottle*Used in both gasoline and diesel fuel engines to detect combustion chamber leaks into the cooling system*Fluid turns from blue to yellow in gasoline engines and from blue to green in diesel fuel engines