Filter Results By:

Products

Applications

Manufacturers

Testers

find the limits of a design.


Showing results 4336 - 4350 of 4588 products found.

  • Neon Bar Checker

    9195 - TAKK Industries Incorporated

    TAKK?s Model 9195 Neon Bar Checker offers a quick and inexpensive means of determining if static eliminator bars are functioning. The conveniently small pen size unit indicates that each bar emitter is performing properly by the activation of a neon light signal. Static eliminator bars may malfunction due to transformer defects, shorts in the system, need to be cleaned, etc. The bar tester may be used with shockless or ?hot? static control equipment.

  • Multi Protocol Boards

    Excalibur Systems, Inc.

    The EXC-4000 carrier board series was developed to meet the needs of avionic testers for multi-protocol integrated, digital bus testing. Modules may be selected out of a growing list which currently includes MIL-STD-1553/1760, MMSI, H009, ARINC-429, ARINC-708/453, Serial (232/422/485), Discrete and CAN bus. Additionally, an IRIG B decoder implements a global time stamp relative to the IRIG B pulses. The need for higher density, different protocols, and multi-channel on one integrated test card has made the EXC-4000 series very successful.

  • Motorized Force Test System

    MT Series - Qualitest International Inc.

    In the past, film extruders, paper producers, converters, and woven/non-woven fabric producers have had the choice of test stands and universal test machines which are either value-priced peak-force-only machines, or expensive computer-operated integral-load cell machines. Now you can have the best of both worlds in a single instrument. The series MT-1500, a simple to use computer operated tester, with Quality Control software for automatic calculation and graphical display of break, elongation, yield, modulus, and other, tension and compression force information.

  • Motorized Test Stand with PC Control

    35-10 - Testing Machines, Inc.

    The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments. Sample setup and fine positioning are a breeze with available FollowMe force-based positioning - using your hand as your guide, push and pull on the force gauge or load cell to move the crosshead at a variable rate of speed.

  • Interface Emulator using MAPS

    GSM Abis - GL Communications Inc.

    GL's GSM Abis Interface Emulator is an advanced protocol simulator/tester for GSM simulation over Abis Interface that can simulate BTSM messages and signaling specification as defined by 3GPP standards. The tester supports testing network elements BTS and BSC, Error tracking, regression testing, conformance testing, load testing/call generation and generation of high volumes of GSM traffic. It is able to run pre-defined test scenarios against GSM Abis interface test objects in a controlled & deterministic manner.

  • Interface Emulator using MAPS

    GSM A - GL Communications Inc.

    GL's GSM A Interface Emulator is an advanced protocol simulator/tester for GSM simulation over A Interface that can simulate BSSMAP and DTAP messages and signaling specification as defined by 3GPP standards. The tester supports testing network elements MSC and BSC, Error tracking, regression testing, conformance testing, load testing/call generation and generation of high volumes of GSM traffic. It is able to run pre-defined test scenarios against GSM A interface test objects in a controlled & deterministic manner.

  • Maintenance Test Kit

    TTK-MT - Triplett

    Model 9045, True RMS DMM w/ Temp, Capac. & Resistance (PN 9045). Model 9310-A, AC/DC Clamp-On (PN 9310). TDR, Cable Length Meter / Fault Finder (PN 3271). Plug-Bug 2, GFCI Receptical Tester (PN 9610). Sniff-It 2, AC Voltage Detector (PN 9601). Professional AutoLoader Multi-Bit Screwdriver (PN TPAL-001). Breaker Sniff-It, Circuit Breaker identifier (PN 9650). Blow-Molded Carrying Case with Foam Insert.

  • Manual Pressure Calibration

    Fluke Calibration

    Manual pressure calibrators are a fast and practical solution for generating and adjusting pressure while calibrating analog pressure gauges and other sensors. They are convenient for mobile calibration applications. Fluke Calibration's pressure monitors combine very high accuracy measurement capability and a variety of unique features in compact and easy to use packages, either standalone or integrated with a calibrator. Models include E-DWT DHI electronic deadweight testers; RPM4 DHI pressure monitors and 7050 Ruska pressure monitors.

  • Mass Interconnect Solutions

    ECT

    Mass interconnect systems act as the connector interface between test instruments (PXI, VXI, LXI, GPIB, SCXI & PCI) and devices / units under test (DUT / UUT) These are often used in Defense, Aerospace, Automotive, Manufacturing, and other applications. By mating a receiver on the tester side with an interchangeable test adapter (ITA) on the UUT, the mass interconnects enables the entire system to mate together at one time. Mass Interconnect Systems are available in multiple sizes and configuration to accommodate virtually any testing requirement.

  • Load Testing vs. Stress Testing

    Dotcom-Monitor

    A load test is a planned test to perform a specified number of requests to a system in order to test the functionality of the system under specific levels of simultaneous requests. A load test ensures that a web system is capable of handling an expected volume of traffic, and therefore is sometimes referred to as volume testing. The goal of a load test is to prove that a system can handle the expected volume with minimal to acceptable performance degradation. The threshold of acceptable performance degradation must be defined by the testers as some value considered acceptable to the end user so that users will not bounce from the site.

  • Integrated 5G mmWave Test System

    IQgig-5G - LitePoint Corporation

    The IQgig-5G is a fully-integrated, non-signaling solution for testing 5G mmWave products at both the 28 GHz and 39 GHz frequency bands. All signal generation, analysis, and RF front-end routing hardware are self-contained inside a single chassis. The IQgig-5G is license-upgradeable to support the pre-5G and 3GPP standards evolution with up to 1 GHz of tester bandwidth. The IQgig-5G solution has three bi-directional source and measurement ports each with 2.92mm connector coaxial interface.

  • LT Cable Fault Locator

    Techno Instrumentation (India) Private Limited

    Inbuilt DC High voltage tester (Hipot) for cable fault detection.Inbuilt burning facility of more than 300 mA for high resistance faults.Surge generation(Thumping) up to 5 kV with 750 Joules energy.Cable fault distance locator for finding the distance to faults.Finding the exact location of fault using an Underground cable fault locator(Digipoint).

  • LTE Emulation for End-to-End QOS Validation

    IxLoad-Wireless XAir2 - Ixia

    Ixia’s XAir2 load module provides LTE user equipment (UE) emulation that enables a powerful IxLoad eNodeB Layer 1 to 7 test solution. With complex UE modeling, it offers realistic and easily-configured traffic models and call patterns. Using IxLoad’s real-world subscriber modeling, testers do not need to be protocol experts to develop test realism. From a single tool, users can perform capacity tests, detail a cell throughput, measure voice and video quality, model a wide variety of mobility scenarios.

  • JTAG External Modules for Cluster Test

    JEMIO - StarTest

    The JTAG External Modules JEMIO™ for Cluster test are intended to provide test access to off-board signals that otherwise could not be accessed by a JTAG test system. For many designs, Boundary-Scan has adequate access to on-board signals, but signals that go off the board often cannot be tested by a JTAG tester. By adding JTAG access to these off-board signals, JEMIO™ modules can increase the board's JTAG test coverage, possibly reducing the need for implementing another test method or for developing alternative tests to reach the required level of test coverage.

  • LEON Desktop

    Konrad Technologies GmbH

    Based on standard PXI chassis and optionally equipped with the ABex technology, the LEON Desktop offers test engineers a flexible and cost effective test solution for desktop use or integration in customized test systems. It can easily be extended by functional test and boundary scan modules. As well as all testers of Leon Family the KT LEON Desktop is based on the multifunction card KT-PXI-501.Benefits Easy implementation Low cost Test in paralell Open Platform PXI Extrem modular