Filter Results By:

Products

Applications

Manufacturers

Testers

find the limits of a design.


Showing results 4606 - 4620 of 4653 products found.

  • VACUUM PRESSURE UNIT

    TestVonics, Inc.

    The Vacuum Pressure Unit (VPU) is an 7-inch high (4U), rack-mounted pneumatic device that provides vacuum and pressure as external sources for use with Air Data Calibrators and Testers. The VPU is enclosed in a 7.0 x 19.0 x 14.5 in. case and weighs 18 lbs. The lightweight design allow for ease of handling and may be used on a bench top or mounted into a standard 19-inch wide equipment rack in a repair facility. The operates with 115VAC single phase power. Rear panel fittings allow connection of the VPU pressure and vacuum outputs for convenient operation. Two hoses are provided, one each for vacuum and pressure, with a length of 8 feet each for connecting the VPU to the intended calibrator or test system.

  • Transformer Resistance Meter

    HTZZ-20A - Wuhan Huatian Electric Power Automation Co., Ltd.

    Transformer Resistance Meter is an essential test project during transformer delivery, repair and changing tapping switch. Usually, it is a time consuming task to use traditional methods (bridge method and voltage drop method) to measure transformer winding and DC resistance of high-power inductive device. In order to change this situation: shorten measurement time and reduce the staff's workflow, our company has developed DC resistance rapid tester. The instrument using new power technology, with characteristics such as stable performance, rapid test, small size, light weight, easy operation, high measure precision and good data reproducibility, is the ideal equipment to measure transformer winding and DC resistance of high-power inductive device.

  • Transformer Resistance Meter

    HTZZ-50A - Wuhan Huatian Electric Power Automation Co., Ltd.

    Transformer Resistance Meter is an essential test project during transformer delivery, repair and changing tapping switch. Usually, it is a time consuming task to use traditional methods (bridge method and voltage drop method) to measure transformer winding and DC resistance of high-power inductive device. In order to change this situation: shorten measurement time and reduce the staff's workflow, our company has developed DC resistance rapid tester. The instrument using new power technology, with characteristics such as stable performance, rapid test, small size, light weight, easy operation, high measure precision and good data reproducibility, is the ideal equipment to measure transformer winding and DC resistance of high-power inductive device.

  • Transformer Winding Resistance Meter-1

    HTZZ-1A - Wuhan Huatian Electric Power Automation Co., Ltd.

    Transformer Winding Resistance Meter-1 is an essential test project during transformer transfer, repair and changing tapping switch. Measuring DC resistance of transformer winding, you can check out weld or connection quality of down-lead, the winding inter-turn short circuit or open circuit, and whether tap-changer is well contacted. In the previous it is generally to use QJ44 double bridge to measure DC resistance, but the measuring current for this type of bridge is mA level current. So measurement will take a long time, and accuracy is lower. In order to change the above situation, our company has developed HTZZ-1A DC Resistance Rapid Tester.

  • Utility Card: Boundary Scan Applications

    Keysight Technologies

    With the Keysight utility card, you can integrate boundary scan plug-in solutions into the i3070 or 3070 testhead*.This new feature allows customers to leverage boundary scan solutions that have been developed at R&D and NPI stages into the manufacturing environment. This reduces engineering effort to redevelop tests.Using the boundary scan plug-in card on the Utility Card, the developed boundary scan test can be integrated into the ICT testplan quickly and easily to increase test coverage.* Customers who are currently using the existing i3070 or 3070 series of testers on software versions earlier than 08.00p can enjoy the full capabilities of the Series 5 utility card by upgrading their hardware and software. For more information, please contact us.

  • Test Analysis for Land Seismic Systems

    Testif-i Land - Verif-i Ltd

    Testif-i Land is an independent, powerful and cost effective software suite that allows you independently process instruments, source and receiver tests to confirm that the equipment is performing correctly and within specification. The software includes modules to perform comprehensive analysis of vibrator wireline similarity test data. Analysis includes a harmonic intensity plot which can highlight problems such as sub-harmonics which may not be seen on numerical results. Geophone pulse tests can be analysed using the receiver response module and test data from third party geophone testers can be graphed and statistics produced for ease of interpretation.

  • WLAN 802.11a/b/g/j/p/n/ac/af/ah/ax Measurement Application, Multi-Touch UI

    N9077C - Keysight Technologies

    The N9077C WLAN measurement application is one in a common library of more than 25 measurement applications for the Keysight X-Series signal analyzers, an evolutionary approach to signal analysis that spans instrumentation, measurements and software. The N9077C WLAN measurement application transforms the X-Series signal analyzers into IEEE 802.11 standard-based WLAN transmitter testers by adding fast one-button RF conformance measurements to help you design, evaluate, and manufacture your WLAN transmitter. The measurement application is fully compliant to the IEEE 802.11 series standards, helping you thoroughly test your WLAN design with confidence and support manufacturing with a single application that covers 802.11a/b/g/j/p/n, 802.11ac, 802.11af,802.11ah, and 802.11ax.

  • Winding Resistance Ohmmeter

    HTZZ-3A - Wuhan Huatian Electric Power Automation Co., Ltd.

    Winding Resistance Ohmmeter is an essential test project during transformer transfer, repair and changing tapping switch. Measuring DC resistance of transformer winding, you can check out weld or connection quality of down-lead, the winding inter-turn short circuit or open circuit, and whether tap-changer is well contacted. In the previous it is generally to use QJ44 double bridge to measure DC resistance, but the measuring current for this type of bridge is mA level current. So measurement will take a long time, and accuracy is lower. In order to change the above situation, our company has developed HTZZ-3A DC Resistance Rapid Tester.

  • VPWM OBD ECU Simlator

    mOByDic1310 - Ozen Elektronik Inc.

    The J1850 VPWM multiple ECU simulator provides a professional OBD development platform which allow the user to test the OBD functionality on the table. Simulates 4 differnt ECUs. reading VIN and suspended DTC is possible . Using 5 potensiometer , 5 live data can be changed and some fixed PID values are provided. Pressing DTC bouton the trouble codes are generated and the MIL LED is ON. Service 4 commands clear the DTCs and the MIL LED. Connection to the tester is provided via a J1962 female OBD port . it needs an external 12 V power supply . More information you can get from the corresponding chipset datasheet.

  • 30 Amp Fuse Buddy

    305M - Electronic Specialties Inc.

    *Fuse Buddy Testers can test circuit current up to 30 Amps. *Two 30 Amp models, #305M used with Mini size fuses and #306B used with ATC size fuses. *Blowing fuses? Get the Fuse Buddy, a great new product. *Clever design allows for easy connection into fuse sockets. *30 Amp models have resolution of .1A, while 20 Amp models have .01A resolution. *Fuse Buddy ends are molded into the shape of the fuse itself. *During testing the fuse is removed and replaced into the Fuse Buddy. This way, the circuit being tested maintains fuse protection. *The Fuse Buddy stays put and won't fall out of the socket, like test probes do. 305M & 306B Specifications *Tests circuit current from 0 to 30 Amps/48 Volts *Resolution .1A (100 milliamps), accuracy + 2%

  • Battery discharger

    Nanjing Clean Energy Electronic Technology Co.,Ltd

    This one is for battery with voltage below 20V, if you need for battery 12V/ 24V/ 36V/48V application,you will need to choose another model in our store.FDY10-S Battery tester structural design in reasonable,easy to carry,may detection batterycapacity,can also measure battery discharge time and discharge AH.Comprehensive detectionand measure two function new type measure equipment.Can adaptive from 1V to 20V voltagerange different varieties different types,Measure battery varieties:Ni-Cd, Li-Ion, Pb, Ni-Mh,Ag-Zn, LMP, Li,po, Pb, lead acid batteries... Measure current range from 0.1A to 10A auto constantcurrent,set stop discharge voltage range from 0V to 20V,when discharging LED can real timedisplay battery voltage ,Current,Power, AH and total time.When stop discharge LED display AHand discharge time.

  • Cable/Circuit/Lighting Arrester Test Device

    Wuhan NANR Electric Co,. Ltd

    cable fault detector is to cater to industrial-grade power industry solutions and IT era of rapid development, the original cable fault tester limitations, using industrial embedded computer platform systems, network services, USB communication technology systematic, very greatly improve the instrument''s functions and use value and convenient on-site environmental operations. Especially for the growing number of buried cable provides a unique data management software. The entire system meets PRC power industry standard "DL/T849.1 ~ DL/T849.3-2004" special test equipment electrical equipment General technical conditions, the system is tested by the system host and the fault locator and meter three-part cable path for all kinds of power cable fault test, cable path, the depth of buried cables and cable testing archives to find the daily maintenance and management, as well as railways, airports and signal control cables, and streetlights accurate cable fault testing

  • Diagnostic OLPD Spot Testing

    High Voltage Partial Discharge, Ltd.

    The diagnostic phase typically involves The HVPD Kronos® Spot Tester and the HVPD Longshot™. This type of technology allows more detailed testing to be undertaken where OLPD data is collected from all three phases at once (to within 10 ns on all channels on advanced test units). This enables discharge type, phase-to-phase or phase-to-earth, to be ascertained. Typical diagnostic spot test times range from around ten minutes to one hour per asset with detailed data analysis and reports often required upon completion of the tests. If OLPD activity is detected, then the diagnostic testing is extended to locate the source of the PD site(s) within the circuit under test. In the case of HV cables, OLPD Cable Mapping is carried out to locate the source(s) of PD activity along the cable circuit.

  • Compact DOW Test System

    DOW3000 - EMC Partner AG

    Electronic measurement and control equipment in the energy distribution network can be susceptible to environmental disturbances. The latest development from EMC PARTNER AG is a high voltage test system for damped oscillatory wave testing. DOW3000 is a configurable test system that can be extended for Slow Wave, Fast Wave, Impulse voltage test or any combination of all three. This provides optimum and cost efficient capabilities to a wide spectrum of users. This unique system includes an integrated 32A three phase coupler which enables both Slow and Fast DOW signals to be directly injected into the EUT. Additionally, DOW3000 is the first tester with integrated 0.5J impulse, required together with the DOW, for product standard testing. A modern user interface provides an easy to follow menu structure. Graphic and contextual help functions make operation simple and efficient.

  • Durometers

    PCE Instruments

    The durometers that you will find on our website are used for determining surface hardness. We have a selection of durometers for determining the hardness of metal, plastic, rubber, fabric, etc. These Hardness testers measure theThe Durometers that you will find on our webpages are used for determining surface hardness hardness in Rockwell B, Rockwell C, Vickers HV, Brinell HB, Shore, HS, Leeb HL or in hardness units (DIN ISO). These devices are especially practical in areas of production, quality control and technical service due to their portability. One advantage of a digital durometers is the internal rechargeable battery found in model PCE-1000. This device with integrated refraction impact offers the advantage of taking measurements without the use of cables that can interfere during a measurement.