Showing results 4846 - 4860 of 4871 products found

  • NikOS Everest - Intelligence-Driven Data in Motion Analytics

    Company: Niksun

    NIKSUN NikOS Everest provides highly flexible, automated views on the data specific to you. No longer is the visualization tied to the data. You have complete freedom to filter, display, visualize, export and even run analytics right within the Everest GUI itself without having to perform ad-hoc special studies to obtain the data you want. Early adopters and testers have attested to NikOS Everest's expert value in the continuously evolving and highly competitive security industry. "NIKSUN NikOS Everest is one of the most robust unified platforms among cybersecurity tools today, providing the ability to render data at every level from a macroscopic view down to each individual packet," said Dr. Peter Stephenson, Chief Technology Editor at SC Magazine. "Not only does NikOS Everest have the ability to pull up this information at rapid speeds, but it also makes it far simpler to view and classify that data than ever before."

  • TA-552 - HSI Test Fixture

    Company: Tech-Aid Products

    This test fixture provides the necessary panel controls, switching and cable pin-outs required to test the KPI-552/KPI-553/A series of HSI's as described in their respective maintenance manuals. This fixture will serve as the "Instrument Bench Tester" and does have the required differential resolvers and relay switching. Panel jacks are provided for the Heading, Course, RMI and ADF synchro sources that are external to this fixture. The use of external synchro sources serves to minimize the cost of this panel. Additional items incorporated on the panel are test jacks to monitor the meter drive voltage and current as well as a momentary switch to open the meter drive and this serves to verify sticky meter stops. The fixtures rear panel provides for all power inputs as well as an I/O connector if the shop desires to interface an external synchro panel.

  • TM203 - Optical Power Meter

    Company: T&M Tools

    TM203 optical power meter is a new generation, high performance and handheld optical network tester which adopts the latest precision laser exploration and processing technology. It is a compositive optical power meter aimed at opening, maintenance, equipment research and development of optical network. It stays TM203’s design small dimension for easy carrying but have new features for wider power measurement, higher accuracy and have date and time display on the screen. It is calibrated at a large number of wavelengths to enable power measurements on a wide range of Single Mode and Multimode fiber optic cable systems. The TM203 optical power meter defines a new industry standard for Installing testing, maintaining single mode and multimode networks and cables.

  • PM-800 - Optical Power Meter

    Company: Optokon A.s.

    The PM-800 optical power meter is designed to measure absolute or relative optical power in optical networks. The AWD (Auto Wavelength Detection) function facilitates the tester settings and eliminates the operator´s failure. The memory capacity allows storage and uploading of up to 3000 measurements including memory position or fiber number, wavelength, absolute value or relative value and insertion loss. The SmartProtocol PC evaluation software supports memory download and test report generation. The rechargeable battery ensures long term working with a minimum service life of 5 years. Batteries can be charged via a USB port or external AC/DC adaptor. The microprocessor controlled charging process ensures optimal battery status and extended operation time.

  • 9363-LN-100 - Large-Displacement Low-Frequence Vibration System

    Company: King Design Industrial

    This tester is designed to assess the damage made to product packaging and internal objects caused from transporting environment; to discover the packaging flaw and product’s early failure from a long-term cumulative vibration fatigue; avoid man-made transporting damage and improve product’s reliability and quality of delivered products. With the use of high-performance foot absorber, the resonance effect to floor caused by the bounce test may be waived; and can reduce the pile’s destruction to industrial plants. Two displays can make comparative display on both frequency and rpm at the same time; thus no need to switch in order to read these two values. The dual-control mode of time accumulator and counter can avoid human error resulting from the conversion. Easy to operate; no need for complicate training program.

  • Mooney Viscometer

    Company: Qualitest International

    The Mooney Viscometer measures the change in a rubber and plastic elastomer properties over time, from uncured to scorched state. The specimen is physically deformed by a rotating platen which will determine changing viscosity at preset temperatures. When the test is completed, the dies will automatically reset and allow for removal of the specimen. With the PID temperature controller you can assure that smooth and accurate data will be taken throughout the test. The servo-driven motors contribute to very accurate results; they are also quiet and require no maintenance. This tester is designed for easy maintenance; it is equipped with modular electrical boards, quick detachable upper and lower dies, calibration via computer and auto hardware detect features. The unit is safe as it is equipped with a transparent arc shield. With our Mooney viscometer you can ensure reliable results at an affordable price.

  • 305M - 30 Amp FUSE BUDDYTM

    Company: Electronic Specialties

    Fuse Buddy Testers can test circuit current up to 30 Amps. Two 30 Amp models, #305M used with Mini size fuses and #306B used with ATC size fuses. Blowing fuses? Get the Fuse Buddy, a great new product. Clever design allows for easy connection into fuse sockets. 30 Amp models have resolution of .1A, while 20 Amp models have .01A resolution. Fuse Buddy ends are molded into the shape of the fuse itself. During testing the fuse is removed and replaced into the Fuse Buddy. This way, the circuit being tested maintains fuse protection. The Fuse Buddy stays put and won't fall out of the socket, like test probes do. 305M & 306B Specifications Tests circuit current from 0 to 30 Amps/48 Volts Resolution .1A (100 milliamps), accuracy + 2%

  • KD-128A - Air-arm-type Drop

    Company: King Design Industrial

    All new developing products must undergo several strict testing processes while in designing, manufacturing and packing/ shipping even. Our drop tester will provide data digitizing and analyzing of your drop and striking while the products in transportation. The testing data will help you improve the packing and buffer materials.Packaged drop test is applied to test the anti-vibration & covering capability of packaging material and the sufficiency of product’s impact-resisting capability regarding packaged products. And use the test result to determine how to improve the packaging design. Free drop test is used to assess the characteristics of product’s free fall from improper actions; and evaluate the required strength and toughness of product under safety conditions.Repeated free fall test is to simulate object’s condition after normal fall to hard surface.

  • MTS-916 Series - Modular Target Simulator

    Company: Marvin Test Solutions

    The MTS-916 is a state-of-the-art target simulator for optically-guided weapons such as the AGM-65 and TGM-65 Maverick missiles and guidance sections, MAU-169 Paveway kits, and AGM-114 missiles. Originally designed to replace the obsolete AN/DSM-129 (TV/CCD simulator) and the obsolete AN/DSM-787 (IR simulator), the MTS-916 is fully compatible with any Maverick tester using these legacy simulators. This includes the obsolete AN/DSM-157 (GMTS) as well as the new state-of-the-art MTS-206. Since its initial deployment, the MTS-916 family has been expanded to support testing of MAU-169 Paveway kits (Laser), the AGM-65E/E2, L Maverick, and the AGM-114 Hellfire missile family. Laser variants of the MTS-916 employ an innovative solid-state target design with no moving parts while the TV, CCD, and IR variants employ a moving collimator architecture with precision movement control.

  • Instrumentation/Electronics

    Company: Thames Side Sensors

    Junction Boxes for 4 or 8 load cells in ABS, Aluminium or Stainless Steel (optionally with ATEX approval)Intelligent Junction Box for individual monitoring of load cell performance and error checking of up to 4 load cellsSimple weighing transmitters (with analogue output for connection to a PLC) or high speed transmitters with built-in weight indication, external communications, set points and dedicated check weigher functionsPurpose designed weight indicators with external communications, ATEX approval for use in hazardous areas and IP69K protection for use in harsh, wash-down environmentsDedicated weighing controllers for batching, filling, check weighing, truck weighing and axle weighing, with communications and relay outputsInstrumentation/electronics with Weights and Measures approvals (legal-for-trade), i.e. OIML R76 and EN45501:2015 (NAWI)Remote displays for secondary weight indication at a different locationLoad cell tester with intelligent diagnosticsLoad cell simulator

  • PV210 - Solar Installation Test Kit

    Company: Seaward Group USA

    The Seaward Solar PV210 PV installation tester provides a highly efficient and effective test and diagnostic solution for PV systems, carrying out all commissioning tests required by IEC 62446 and performing fast and accurate measurement of I-V curves in accordance with IEC 61829. With direct connection to individual PV modules or strings using the supplied lead sets, tests can be conducted easily and within a matter of seconds at the press of a single button. A high contrast display is clearly visible in direct sunlight and shows open circuit voltage, short circuit current, maximum power point voltage, current and power, as well as the fill factor of the PV module or system under test, and insulation resistance (as part of an auto sequence or a discrete probe to probe measurement). If the measured curve deviates from the expected profile, the PV210 alerts the user to this, identifying the need for further analysis.

  • CableEye HVX, HVX-21 - High Voltage, Continuity & Hipot, Cable & Wire Harness Test Systems

    Company: CAMI Research

    Scans for continuity (opens, shorts), miswires, resistance, diodes, dielectric breakdown, insulation resistance, intermittent connections |HVX (Item 829) 1500 Vdc, 1000 VacHVX-21 (Item 829A) 2100 Vdc, 1200 Vac |For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown (DWV). |All CableEye testers are suitable for production, fault diagnosis, QC (Quality Control), assembly, and prototyping of standard or custom cables. Each combines test, fault location, design, documentation, labeling, and database storage in one instrument. |Tests can be performed on long cables (with or without connectors) or no cables (e.g. connectors, backplanes, PCBs, components). |Features & Benefits:USB certified, PC-based tester for a versatile, fast, robust system with long life-cycle.Multilingual, dynamic, graphic-rich display (netlist & wiring schematic) provides clarity and speeds diagnosis.128 Test Points, expandable to 1024 providing flexibility as your product line changes.User-selectable voltage to each connection group in the cable simplifies an otherwise complex process, accelerating testing.Programmable Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) adds versatility.Current leakage detected during HV test phase provides a measure of insulation resistance up to 1 GΩ (HVX) and 5 GΩ (HVX-21) - any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.Real-time screening for intermittent connections for pinpointing elusive faults and improving quality.Automation scripting in a simple, intuitive language allowing non-programmers to reduce operator error by automating repetitive steps.Flexible tolerancing: optionally define as percentages or absolute terms, as well as asymmetrically (e.g. +0%/-10%) for improved yields.Barcode-tracking & archival data-logging to achieve error-proof test process and improved traceability & productivity.Print test reports (with or without wiring schematics/netlists) and log reports to satisfy ISO9000 reporting requirements.Compatible with laptop and touchscreen PCs for fieldwork and rack/off-bench mounting.Includes:CB29 board set (Item 759) for bare wire connections;PC software;Database of >200 standard cables;Warranty: 1yr parts & labor with free tech support and free software upgrades. Renewable yearly;Options:128-point Expansion Module (attaches to base);4-Wire Kelvin Resistance Measurement, 1 mΩ at 1 A;Remote Control Connector for Deadman Switch |camiresearch.com |info@camiresearch.com |@CAMI_CableEye |+1.978.266.2655

  • MU100022A-022 - OTDR Module

    Company: Anritsu

    Anritsu Company introduced a tri-wavelength OTDR module for its Network Master Pro MT1000A portable optical tester that provides field engineers and technicians with a comprehensive test tool to verify fiber lines in core, metro, and mobile networks. The new module supports high dynamic range at all wavelengths, including 1625 nm, which allows the MT1000A to conduct "extra sensitive" tests to ensure the performance of today's high-bandwidth networks. With the new MU100022A-022 tri-wavelength OTDR module installed, the Network Master Pro MT1000A can achieve dynamic range of 46 dB at 1310 and 1550 nm, and 44 dB at 1625 nm. Supporting the high dynamic range at the 1625 nm wavelength allows the MT1000A to achieve highly accurate macrobend detection in all single-mode fiber applications. This new OTDR module also features Anritsu's Fiber Visualizer, a fault location function that simplifies the entire testing process. Fiber Visualizer automatically selects the testing parameters to ensure the proper setup and provides a simple, graphical summary of the fiber under test within seconds. Fiber Visualizer also has individualized PASS/FAIL analysis to simplify fiber optic testing.

  • TS8980 - RF Test System Family

    Company: Rohde & Schwarz GmbH

    R&S®TS8980 is an integrated test system family for LTE, WCDMA and GSM conformance testing. R&S®TS8980 is a family of test solutions for the entire development lifecycle of mobile stations (MS). The R&S®TS8980FTA-2, successor to the R&S®TS8980FTA, is a fully automated conformance test system configured for running validated RF conformance test cases during the design, precertification and type approval of mobile stations. The test system provides a future-ready design capable of supporting new LTE-Advanced technologies. The R&S®TS8980S-2 is a fully automated in-band test solution for precompliance and R & D applications. The R&S®TS8980PRE is a precompliance tester for both inband and out-of-band tests. The R&S®CONTEST software platform of the R&S®TS8980 can be used for applications ranging from scalable test systems to conformance testing. Its simple operation, flexibility in test applications and speed-optimized automated test sequences enhance the efficiency of testing in all development phases of an MS.

  • FTB-4 Pro - Portable Test Platform

    Company: EXFO

    The FTB-4 Pro is the latest addition to EXFO’s test orchestration portfolio which transforms business as usual into smarter, scalable network testing that significantly increases operational efficiency and provides vital insights into field operations, network performance and service delivery. The 4 slot modular FTB-4 Pro platform enables a unique combination for 100G commissioning, turn-up and troubleshooting which includes the FTBx-88200NGE 100G Multiservice tester (with iOptics transceiver validation software) and the FTB-5240S-P optical spectrum analyzer. There is no need to carry additional platforms or swap modules for unmatched transport and spectral testing on a single platform that no one in the industry can offer. The versatile FTB-4 Pro platform supports a wide range of modules for field testing, data center interconnect, submarine testing, and lab applications for maximum flexibility and ROI across all phases of the service delivery chain: development, deployment, maintenance and troubleshooting. Module combinations on the FTB-4 Pro can also include iOLM/OTDRs, market leading OLTS for fiber characterization, dispersion solutions and other transport modules all with compatibility with EXFO’s market leading fiber inspection probes.

Products

Applications

Manufacturers