Testers: find the limits of a design.

Showing results 4936 - 4950 of 4982 products found

  • Test Analysis for Land Seismic Systems

    Testif-i Land - Verif-i Ltd

    Testif-i Land is an independent, powerful and cost effective software suite that allows you independently process instruments, source and receiver tests to confirm that the equipment is performing correctly and within specification. The software includes modules to perform comprehensive analysis of vibrator wireline similarity test data. Analysis includes a harmonic intensity plot which can highlight problems such as sub-harmonics which may not be seen on numerical results. Geophone pulse tests can be analysed using the receiver response module and test data from third party geophone testers can be graphed and statistics produced for ease of interpretation.

  • Rugged Field Test Set

    MTS-207 - Marvin Test Solutions, Inc.

    The MTS-207 is a state-of-the-art portable PXI platform for field testing and data acquisition systems. Its proven architecture has been deployed worldwide on multiple programs including the MTS-206 Maverick Missile system flight line tester, the MTS-209 Common Armament Test Set, the AN/TSM-205B Hellfire System test Set, and many more. It combines the capabilities of the versatile and powerful PXI architecture in a compact, ultra-rugged, flight-line qualified enclosure. The MTS-207 is ideal for test and data acquisition applications requiring operation under harsh environmental conditions including flight-line, back-shop, or airborne applications.

  • Relay Buddy

    190 - Electronic Specialties Inc.

    Relay Buddy is a quick go / no-go tester for the most common automotive relays. It provides you with an indication of the general health and functioning of the relay switch contacts and coil. Relay Buddy will check the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay several times during each test session as it watches for consistency in every cycle. Relay Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful during the test session.

  • Relay Buddy PRO Test Kit

    191 - Electronic Specialties Inc.

    Relay Buddy is a quick go / no-go tester for the most common automotive relays. With the included adapters, Relay Buddy now tests 5 different relay types and also tests shielded relays. Relay Buddy provides you with an indication of the general health and functioning of the relay switch contacts and coil. It will check the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay several times during each test session as it watches for consistency in every cycle. Relay Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful during the test session.

  • Spring Tension-Compression Machine

    TIME GROUP INC

    The load measurement of this tester is digitally displayed, which avoids the reading error of human eyes. The displacement measurement is indicated by staff gauge and vernier, which gets rid of the displacement caused by the deformation of load cell, and therefore the measured displacement is more accurate. The machine is easy to operate,with high efficiency, high precision and stable performance, etc.Load display mode: Digital display, with indication function at upper & lower Limit.Displacement display mode: Staff gauge & vernier indication, with micro adjusting Function.Loading mode: Manual loading, quick and convenient, displacement control through positioning devices. (Above 5000N, automatically loading).

  • Static Analyzers

    Accord Software & Systems,Inc.

    The goal is to enforce uniform coding habits among software personnel in the engineering department so that reading, checking and maintaining code written by different people becomes easier. CodeTrax can also be used to identify subtle programming errors. Software developers, testers, reviewers as well as quality personnel can use CodeTrax to ensure compliance with coding standards. The tool automates the code review process and reduces the effort and resources required. CodeTrax allows the user to benchmark the code developed in C against user defined coding standards. This product can be used any time during the project life cycle. However the best use of this product is from the start of the coding phase and while performing static analysis.

  • Super Megohm Meters

    SM7110 and SM7120 - HIOKI E.E. Corp

    Both products are designed for use in evaluating and testing the performance of electronic components used in products such as smartphones and hybrid vehicles. To accommodate vehicle components with increasingly high breakdown voltages, the SM7120 is the first insulation tester in the world to be able to output a measurement voltage of 2000 V (the SM7110 supports measurement voltage output of up to 1000 V). In addition, both products can complete testing twice as quickly as the previous Hioki model while offering dramatically improved measurement reproducibility and noise resistance. As a result, the new instruments promise to significantly improve evaluation and testing productivity.

  • Protocol Simulator using MAPS

    SS7 - GL Communications Inc.

    GL's MAPS-SS7 is an advanced protocol simulator/tester for SS7 simulation over TDM (E1/T1).MAPS can simulate Service Switching Point (SSP) and ISUP signaling specification as defined by the ITU-T standards. The tester supports testing network elements, error tracking, regression testing, conformance testing, load testing/call generation and generation of high volumes of ISUP traffic. MAPS-SS7 functionality covers the ITU and ANSI variant of SS7 implementing MTP2, MTP3, and ISUP protocols. It is able to run pre-defined test scenarios against ISUP test objects in a controlled & deterministic manner.

  • ADI Test Fixture

    TA-6500 - Tech-Aid Products

    The TA-6500 test fixture combines the features of the OEM's Instrument Servo Tester(T307962), the Pointer/Flag Test Fixture(T307951) and the AD-650/600 Test Panel(T334043) all into one panel to facilitate testing of these Attitude Director Indicator's. The panel switches and adjustment pots are labeled to match the test procedure numbers and the duplicity in marking makes it easier for the technician to understand each function. The UUT interface is through a 96 pin zero insertion force(ZIF) type connector to minimize contact wear. The expanded localizer and nav input pins J2-34/35 are exposed on the panel to facilitate the insertion of a 200 ohm shunt when required. The fixtures rear panel has connectors for the required dual API/Synchro transmitter interface while the panel switches provide the correct routing of each.

  • Battery discharger

    Nanjing Clean Energy Electronic Technology Co.,Ltd

    This one is for battery with voltage below 20V, if you need for battery 12V/ 24V/ 36V/48V application,you will need to choose another model in our store.FDY10-S Battery tester structural design in reasonable,easy to carry,may detection batterycapacity,can also measure battery discharge time and discharge AH.Comprehensive detectionand measure two function new type measure equipment.Can adaptive from 1V to 20V voltagerange different varieties different types,Measure battery varieties:Ni-Cd, Li-Ion, Pb, Ni-Mh,Ag-Zn, LMP, Li,po, Pb, lead acid batteries... Measure current range from 0.1A to 10A auto constantcurrent,set stop discharge voltage range from 0V to 20V,when discharging LED can real timedisplay battery voltage ,Current,Power, AH and total time.When stop discharge LED display AHand discharge time.

  • Cable/Circuit/Lighting Arrester Test Device

    Wuhan NANR Electric Co,. Ltd

    cable fault detector is to cater to industrial-grade power industry solutions and IT era of rapid development, the original cable fault tester limitations, using industrial embedded computer platform systems, network services, USB communication technology systematic, very greatly improve the instrument''s functions and use value and convenient on-site environmental operations. Especially for the growing number of buried cable provides a unique data management software. The entire system meets PRC power industry standard "DL/T849.1 ~ DL/T849.3-2004" special test equipment electrical equipment General technical conditions, the system is tested by the system host and the fault locator and meter three-part cable path for all kinds of power cable fault test, cable path, the depth of buried cables and cable testing archives to find the daily maintenance and management, as well as railways, airports and signal control cables, and streetlights accurate cable fault testing

  • 30 Amp Fuse Buddy

    305M - Electronic Specialties Inc.

    *Fuse Buddy Testers can test circuit current up to 30 Amps. *Two 30 Amp models, #305M used with Mini size fuses and #306B used with ATC size fuses. *Blowing fuses? Get the Fuse Buddy, a great new product. *Clever design allows for easy connection into fuse sockets. *30 Amp models have resolution of .1A, while 20 Amp models have .01A resolution. *Fuse Buddy ends are molded into the shape of the fuse itself. *During testing the fuse is removed and replaced into the Fuse Buddy. This way, the circuit being tested maintains fuse protection. *The Fuse Buddy stays put and won't fall out of the socket, like test probes do. 305M & 306B Specifications *Tests circuit current from 0 to 30 Amps/48 Volts *Resolution .1A (100 milliamps), accuracy + 2%

  • DMX Measurement Tool/Tester

    XMT-120A - SWISSON ag

    The XMT-120A is the new generation of powerful DMX512 measurement and test equipment for architecture, entertainment, film and TV lighting and installations using DMX512. The versatile functions of the XMT-120A simplify the debugging of lighting and installations, or any application where DMX is used to control lighting. The unit can monitor DMX512 signals as well as analyze and display them. The device can also generate DMX512 signal and supports the control of more complex DMX512 fixtures such as moving lights. The testing of RGB LED lighting with many channels is easy to do with the XMT-120A. With additional features such as cable tester, timing analysis, sequence editor, channel "tracer", dip-switch display, flicker finder, and Min / Max display this device is ideal for troubleshooting and resolving DMX512 signal challenges and yet remains very simple to operate. The XMT-120A can be connected via USB to a PC. The Windows software allows for managing the fixture library for intelligent devices and uploading firmware updates.

  • Durometers

    PCE Instruments

    The durometers that you will find on our website are used for determining surface hardness. We have a selection of durometers for determining the hardness of metal, plastic, rubber, fabric, etc. These Hardness testers measure theThe Durometers that you will find on our webpages are used for determining surface hardness hardness in Rockwell B, Rockwell C, Vickers HV, Brinell HB, Shore, HS, Leeb HL or in hardness units (DIN ISO). These devices are especially practical in areas of production, quality control and technical service due to their portability. One advantage of a digital durometers is the internal rechargeable battery found in model PCE-1000. This device with integrated refraction impact offers the advantage of taking measurements without the use of cables that can interfere during a measurement.

  • Digital Multimeters

    Gardner Bender

    Equipped with an easy-to-read 3.5 inch backlit LCD digital display and magnetic holding strap making this tester ideal for automotive, appliance, circuit breaker, and other "hands-free" applications. In addition the multimeter features rubber housing to promote a steadfast comfortable grip while wrap-around lead holders keep leads at the ready. Snap-in probes spaced to fit a standard outlet provide quick and easy testing with one hand. Engineered with seven testing functions; AC Voltage to 500V, DC Voltage to 600V, Resistance to 20 meg Ohms, Diode, Continuity (includes audible indication), Temperature Probe (-40 to 1832 degrees F) and Battery Testing for 1.5 V batteries. The 7 position auto-ranging smooth rotary style achieves precise readings and the low battery indicator with auto-off function ensures an accurate read-out. Durable housing with a rubber boot is drop resistant to 6 ft and crush rated to 150 lbs.

Products

Applications

Manufacturers