Showing results 5551 - 5565 of 5723 products found

  • TPM-50 - Terminal Power meter

    Company: ShinewayTech USA

    ShinewayTech? TPM-50A Terminal Power meter can test (1) Average power range: -40 dBm~+20 dBm;(3) Modulation bandwidth: 5MHz;(3) Continuous signal and burst signal test. Highly accurate power measurement CW and digital modulated signal (For example: GSM/EDGE, CDMA/EV-DO, WCDMA/HSDPA, WiMAX, and TD-SCDMA). It is very important to test that if the transmitter is at a specified level or not. For example, the tester needs to test the output power of base station. Because the lower output power produces the larger coverage area to cause call interruption.

  • AH9710 - TAB Handler

    Company: TESEC

    The TAB tape is sent from the supply reel (up) to the test site at any set pitch and positioned very accurately with respect to X and Y directions. Then the electrical characteristics are tested by the contactor which is connected to the tester. Based on the test results, the tested IC is sorted and the TAB is wound on the receive reel (down). All the processes are automatically performed.

  • Tablet Tensile Analyzer

    Company: Gamlen Tableting

    Gamlen Tablet Tensile Analyzer Simplifies evaluation of tablet samples using automatic measurement of key tablet CQAs directly to your compute. The Tablet Tensile Analyzer has been specially developed to simplify the evaluation of tablet samples made on the Gamlen Tablet Press GTP-1 and Gamlen Powder Compaction Analyzer PCA-500. It is a modified tablet tensile tester combined with a 4-figure analytical balance and electronic micrometer.

  • PT1076A - Tone/Pulse Telephone Dial Caller Id Auto Analyzer

    Company: Fulling & CEIEC CO

    PT9401E Telephone Dialing / Caller ID Analyzer is a new kind of digital meter designed specially for the test of telephone dial characteristics (Pulse /Tone) and Caller ID. The tester has not only reached advanced level of the same kind ones at home and abroad in functions speed and precision but also been an indispensable appliance both for telephone design and research.

  • 50928 - Tow Doctor™ Trailer Wire Harness Test Unit

    Company: Hopkins Manufacturing

    Designed so that one person can make sure a trailer has been wired properly and all functions are workingTests all trailer functions: left turn, brake, tail, backup lights; electric brakes and auxiliary powerTrailer lights illuminate and LED lights on the tester to show function operationAdapts to 4-Wire Flat, 6-Pole Round, or 7 RV Blade

  • UTP9080 Series - Universal Test Stand

    Company: NOFFZ Computer Technik

    The UTP9080 series is a versatile, extendable, universal test stand for ICT, functional testing and end-of-line tests of circuit boards. The boards under test can be connected one-sided, double-sided or step by step for multi-panel applications. Because of its automated feeder system, conveyor belt and interlocking, the system allows short tooling times and offers compatibility with all established tester systems.

  • TM25r - Tower Footing Resistance Meter

    Company: Scope T&M Pvt Ltd

    The transmission towers are electrically grounded by ground wires and due to the existence of this connection, any attempt to measure a tower ground resistance by any conventional earth tester leads to wrong results. To make this kind of test feasible, TM- 25R is the appropriate tool for a fast, safe and reliable grounding resistance measurement in each tower at charged transmission lines, without disconnecting the ground wire. The equipment only measures the ground resistance of the Surveyed Tower, including its base.

  • B8562 - 100V MEGOHMMETER Surface Resistivity Meter

    Company: Botron

    Portable 100 volt LED megohm tester with two parellel probes and two banana jacks for optional 5lbs weights. a 10 light Surface Resistivity Meter that test at 100 volts. This portable test instrument provides both RTT (resistance top to top) and RTG (resistance top to ground) will measure a wide variety of static dissipative and conductive materials.

  • CTK-PROBE - Tone Probe

    Company: Addlogix

    The CTK-PROBE has a standard push button pause switch, whch allows the user to turn the probe on and off and conserve power when not in use. It also comes with adjustable volume (gain) control for enhanced accuracy, plus a composite tip for reducing the risk of shorting live terminals. When combined with the (optional) Tone Generating Cable Tester (CTK-MNCT-RJT), it will permit a technician to quickly isolate, locate, and test commonly used voice and data cables, thus enhancing efficiency.

  • Bending Testing Machine

    Company: Jinan Testing Equipment

    Motorized bending testing machines are special equipment for bending test on reinforce bar, steel bar and pipe etc. The motorized bending testing machine can do bending test in both directions according to the standard requirement. The motorized bending tester conforms to standards including ASTM A615, ASTM A615M, ISO 7438, and ISO8491 (E) etc.

  • PPROKIT01 - Power Probe Professional Testing Electrical Kit

    Company: Power Probe

    The Power Probe Professional Testing Electrical Kit provides the ability circuit testing Power Probe III combined with the diagnostic capabilities of the PPDMM. This kit includes a Power Probe III Circuit Tester (PP3CS), Cat-IV 600V Digital Multimeter (PPDMM), 2- 10 foot 18 Gauge Leads, 2- Alligator Clips, Spare 600V 10 Amp fuse, Spare 600V 600 Milliamp fuse, Spaded Back Probe, Pin Back Probe, Instructional DVD, all in a convenient blow molded carry case.

  • Argus 41 Plus - ADSL Test Telephone

    Company: Packet Data Systems

    Argus 41 is an entry level hand held tester for ADSL, ADSL2 and ADSL2+.The unit is afforable and simple to use, all functions and tests can be selected and started quickly and easily.Measurement results such as the upstream/downstream rates and noise margins are displayed automatically at the end of a test. Access tests may be saved within the Argus 41.The unit also enables the user to verify that the network wiring will carry ADSL services.The Argus 41 is easily configurable via web interface and free software updates are available via the internet.

  • Argus 42 - ADSL Test Telephone

    Company: Packet Data Systems

    Argus 42 is a practical, affordable and simple to use hand held tester for ADSL.The Argus 42 automatically tests the quality of service within seconds, by receiving the connection rates and noise margins from the DSLAM.The Argus 42 graphically displays the ASDL frequency spectrum together with important data such as: upstream/downstream bit rates, noise margins, relative capacity and attenuation.

  • Automatic semiconductors

    Company: Qmax Test Technologies

    compact small foot print, sophisticated automatic semiconductor tester. Its state-of-the-art hardware design which is freely configurable to user's application requirements and software features facilitates it to test linear & mixed signal IC components which covers a wide range of products like linear, Power management, Opto electronics, digital and mixed signal devices etc.

  • BTS-60V100A - Battery Testing Systems

    Company: LinYi Gelon LIB Co

    The battery tester has one channel for testing all the rechargeable battery (as Ni-MH battery, Ni-CD battery, Lithium-ion battery and polymer batter, etc. ) The testing equipment provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.

Products

Applications

Manufacturers