Showing results 5581 - 5595 of 5664 products found

  • 201 Series - Discrete Semiconductor Test System

    Company: SemiTek International

    The SemiTek 201.net Discrete Semiconductor Test System is PC-based using a CPU-based hardware controller to control the electrical tests it performs. In its sixth generation, the 201.net has served the semiconductor test industry for over twenty-five years in manufacturing and inspection. As a general-purpose tester, the 201.net is ideal for inspection and production applications where precision measurements and versatility are required. Under program control, the 201.net tests a growing number of devices including: * Diodes / Zeners * Bipolar Transistors * Field Effect Transistors * Arrays * MOSFET * MOSFET Depletion * Optocouplers * JFet / JFet NO * Mechanical Relays * Sidac * Triac / SCRs * IGBT

  • N3500 - Flash Memory Test System

    Company: Tanisys Technology

    The N3500 is Tanisys Technology's fourth generation memory test system. Specifically designed for Flash Components and Flash Cards, the N3500 tester-on-a-board architecture targets the broadest range of DUT technologies in various form factors and packages. Each Tester Board (or "Blade") contains 288 I/O pins and 32 DPS supplies. Up to 64 Blades popu lated in one test head can test over 2000 DUTs in parallel. ONFI 3.0 Devices, NAND, eNAND, SD Protocol Cards, MMC Protocol Cards, NOR, MRAM,FME,iNAND and MCP Hybrid Devices/Cards.

  • Probe Testing Services

    Company: Hughes Circuits

    We offer assembly testing services which are specially focused on reducing engineering debug efforts on small and medium production runs.Maintaining high product quality while keeping production costs low, together with aggressive schedules and time to market pressures, force manufacturers to choose lean yet effective test and quality assurance strategies for their production processes.Flying probe testers require no test fixtures, have few restrictions on board access, and can test boards with virtually unlimited number of nets, allowing developers to turn test programs around in a short time.

  • SS7 - Protocol Simulator using MAPS

    Company: GL Communications

    GL's MAPS™-SS7 is an advanced protocol simulator/tester for SS7 simulation over TDM (E1/T1).MAPS™ can simulate Service Switching Point (SSP) and ISUP signaling specification as defined by the ITU-T standards. The tester supports testing network elements, error tracking, regression testing, conformance testing, load testing/call generation and generation of high volumes of ISUP traffic. MAPS™-SS7 functionality covers the ITU and ANSI variant of SS7 implementing MTP2, MTP3, and ISUP protocols. It is able to run pre-defined test scenarios against ISUP test objects in a controlled & deterministic manner.

  • 190 - RELAY BUDDY

    Company: Electronic Specialties

    Relay Buddy is a quick go / no-go tester for the most common automotive relays. It provides you with an indication of the general health and functioning of the relay switch contacts and coil. Relay Buddy will check the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay several times during each test session as it watches for consistency in every cycle. Relay Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful during the test session.

  • 191 - RELAY BUDDY® PRO TEST KIT

    Company: Electronic Specialties

    Relay Buddy is a quick go / no-go tester for the most common automotive relays. With the included adapters, Relay Buddy now tests 5 different relay types and also tests shielded relays. Relay Buddy provides you with an indication of the general health and functioning of the relay switch contacts and coil. It will check the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay several times during each test session as it watches for consistency in every cycle. Relay Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful during the test session.

  • Spring Tension-Compression Machine

    Company: TIME GROUP

    The load measurement of this tester is digitally displayed, which avoids the reading error of human eyes. The displacement measurement is indicated by staff gauge and vernier, which gets rid of the displacement caused by the deformation of load cell, and therefore the measured displacement is more accurate. The machine is easy to operate,with high efficiency, high precision and stable performance, etc.Load display mode: Digital display, with indication function at upper & lower Limit.Displacement display mode: Staff gauge & vernier indication, with micro adjusting Function.Loading mode: Manual loading, quick and convenient, displacement control through positioning devices. (Above 5000N, automatically loading).

  • SM7110 and SM7120 - Super Megohm Meters

    Company: HIOKI E.E.

    Both products are designed for use in evaluating and testing the performance of electronic components used in products such as smartphones and hybrid vehicles. To accommodate vehicle components with increasingly high breakdown voltages, the SM7120 is the first insulation tester in the world to be able to output a measurement voltage of 2000 V (the SM7110 supports measurement voltage output of up to 1000 V). In addition, both products can complete testing twice as quickly as the previous Hioki model while offering dramatically improved measurement reproducibility and noise resistance. As a result, the new instruments promise to significantly improve evaluation and testing productivity.

  • T4110S - LTE Protocol Test System

    Company: Keysight Technologies

    Protocol conformance testing of LTE UEsMore than 80% coverage of GCF/PTCRB Protocol LTE test cases with just one dual cell T2010A unitComplete coverage of 3GPP 36.523-1 LTE protocol conformance test cases with just two T2010A unitsSame hardware configuration as T4020S LTE RRM tester, allowing software only upgrade between both productsLTE FDD, TDD and multi-RAT support in the same hardware platformFull test system automation and UE automation capabilities allowing unattended operation of the test systemEasy to use test project management environment for streamlined testing execution and results analysisPowerful test case results and logs analysis tools

  • MOIST-41 - Moisture analyzer

    Company: MRC Ltd

    Max Sample 18 samples (Inherent moisture)9 samples (total mo moisture)Sample Weight (0.9-1.1)g for moisture content on airdried basis; (10-12)g for total moistureFurnace Temperature 105C t0 110CTemp. Control Precision 3CAnalysis Time (20-40)minPower Requirement 220V(-15%-10%), 50HzMax Power 1.5kwSize / Net weight 542x506x564mm / 53kgStandard Layout Moisture Tester / Lenovo PC(Desktop) / PrinterISO117722 Solid mineral fuels Hard coal Determination ofmoisture in the general analysis test sample by drying innitrogen ASTM D5142-09 Standard Test Method forProximate Analysis of the Analysis Sample of CoalGB/T212-2008 Standard

  • VACUUM PRESSURE UNIT

    Company: TestVonics

    The Vacuum Pressure Unit (VPU) is an 7-inch high (4U), rack-mounted pneumatic device that provides vacuum and pressure as external sources for use with Air Data Calibrators and Testers. The VPU is enclosed in a 7.0 x 19.0 x 14.5 in. case and weighs 18 lbs. The lightweight design allow for ease of handling and may be used on a bench top or mounted into a standard 19-inch wide equipment rack in a repair facility. The operates with 115VAC single phase power. Rear panel fittings allow connection of the VPU pressure and vacuum outputs for convenient operation. Two hoses are provided, one each for vacuum and pressure, with a length of 8 feet each for connecting the VPU to the intended calibrator or test system.

  • HTZZ-3A - Winding Resistance Ohmmeter

    Company: Wuhan Huatian Electric

    Winding Resistance Ohmmeter is an essential test project during transformer transfer, repair and changing tapping switch. Measuring DC resistance of transformer winding, you can check out weld or connection quality of down-lead, the winding inter-turn short circuit or open circuit, and whether tap-changer is well contacted. In the previous it is generally to use QJ44 double bridge to measure DC resistance, but the measuring current for this type of bridge is mA level current. So measurement will take a long time, and accuracy is lower. In order to change the above situation, our company has developed HTZZ-3A DC Resistance Rapid Tester.

  • H730035xx - High Voltage Switching matrix

    Company: 6TL Engineering

    This switching matrix enables the switching between different test poinits, when performing dielectric strenght test and Hipot test. It is featuring High Voltage relays, controlled through CAN bus. The module features one relays normally closed, with a red LED that is indicating its status, that when no power, will keep J2 and J3 input terminals linked through a resistor, to ensure electric discharge of all loads after the test. Conexions are made with special high voltage conectors. Input terminals from Hipot tester are in front of the module, while up to 8 outputs are in the back panel. A 4 wire connector in the back plane, is used for powering up the device and control through CAN bus.

  • MD 5075x - Insulation Resistance Measurement

    Company: Scope T&M Pvt Ltd

    The digital insulation tester model MD-5075x is Megabras'' cutting edge insulation analyzer equipment and it is one of the most complete and sophisticated available in the international market. A powerful software allows for further analysis of tests results, including features such as graphical representation and automatic report generation. Its proven technology provides safe, reliable and accurate measurements of insulation resistances up to 5 TW, with 4 pre-selected test voltages, 500 V - 1 kV - 2.5 kV - 5 kV. Other test voltages may be selected in steps of 25 V, 100 V or 500 V.

  • HTZZ-2A - inding Resistance Ohmmeter

    Company: Wuhan Huatian Electric

    inding Resistance Ohmmeter is an essential test project during transformer transfer, repair and changing tapping switch. Measuring DC resistance of transformer winding, you can check out weld or connection quality of down-lead, the winding inter-turn short circuit or open circuit, and whether tap-changer is well contacted. In the previous it is generally to use QJ44 double bridge to measure DC resistance, but the measuring current for this type of bridge is mA level current. So measurement will take a long time, and accuracy is lower. In order to change the above situation, our company has developed HTZZ-2A DC Resistance Rapid Tester.

Products

Applications

Manufacturers