Showing results 5626 - 5640 of 5664 products found

  • Ohm-Stat Digital Display Megohmmeter

    Company: Static Solutions

    Measures resistivity RTT, RTV, and RTG 103-1012 ohms/sq., ohms, ohm-cmRelative humidity 10% 90% RHTemperature 32oF 100oFDigital display: easy to interpretNIST calibration includedIncludes chair probe to measure smocks, earth ground, chairs, and resistance probes: $400 value for freeResistivity probe built in the bottom of meterProduct conforms to the ESD S.20.20 spec standardsCE mark includedThe kit includes, two (5) lb probes, coil cords, hard carrying case, battery, 110v or 220v adaptor, garment clips, chair probe, and ground circuit tester

  • ST-HDoC - Installation & Test Meter

    Company: SecurityTronix

    he SecurityTronix ST-HDoC is designed for maintenance and installation of HD-CVI, HD-TVI, AHD and analog cameras as well as other security equipment. It’s 3.5” 480 x 320 resolution screen enables it to display images from HD cameras and analog cameras in top quality. The unit supports HD over coax, PTZ, ONVIF PTZ and analog PTZ controls. In addition, the tester is also a great tool for Ethernet networks and cabling systems. It includes the ability to test network cables while verifying the sequence of the individual conductors. The meters portability, user-friendly design and multi-function capability make it an essential tool for installers and technicians, greatly improving work efficiency and simplifying installations and system maintenance.

  • ST-HDoC-MM - Installation & Test Meter

    Company: SecurityTronix

    The SecurityTronix ST-HDoC-MM is designed for maintenance and installation of HD-CVI, HD-TVI, AHD, SDI and analog cameras as well as other security equipment. It’s 3.5” 480 x 320 resolution screen enables it to display images from HD cameras and analog cameras in top quality. The unit supports HD over coax, PTZ, ONVIF PTZ and analog PTZ controls. In addition, the tester is also a great tool for Ethernet networks and cabling systems. It includes the ability to test network cables while verifying the sequence of the individual conductors. The meters portability, user-friendly design and multi-function capability make it an essential tool for installers and technicians, greatly improving work efficiency and simplifying installations and system maintenance.

  • 2471F - Megohmmeter

    Company: Barfield

    The 2471F megohmmeter is designed to check the insulation breakdown in a variety of applications requiring a high voltage but low current. The 2471F Megohmmeter provides the operator with a simple, rugged, portable analog unit with selectable test voltages of 45, 100, 200 and 500 VDC. The range of test voltages allows the operator to quickly test and pinpoint insulation breakdown over a range of 0.5 to 1000 Megohm. The tester is battery operated, with no warm-up time necessary allowing completely portable, fast, reliable checks of antenna bonding, shielding, static wicks, ground straps, etc.

  • Equipment Level Intergration

    Company: TechSAT GmbH

    Integration and verification on equipment level remain a time-consuming challenge because the technological and normative requirements are extensive. To meet this challenge, we offer our customers the MAYA family, an ADS2-based technology platform based on which equipment-specific test systems can be quickly supplied. The MAYA family allows us to utilize the worldwide proven technology of our large-scale test benches also in compact and modular desktop systems with equipment-specific interfaces and breakout panels. This design keeps preparation and training of equipment developers or testers short so they can quickly start working on the target system.

  • Battery discharger

    Company: Nanjing Clean Energy

    This one is for battery with voltage below 20V, if you need for battery 12V/ 24V/ 36V/48V application,you will need to choose another model in our store.FDY10-S Battery tester structural design in reasonable,easy to carry,may detection batterycapacity,can also measure battery discharge time and discharge AH.Comprehensive detectionand measure two function new type measure equipment.Can adaptive from 1V to 20V voltagerange different varieties different types,Measure battery varieties:Ni-Cd, Li-Ion, Pb, Ni-Mh,Ag-Zn, LMP, Li,po, Pb, lead acid batteries... Measure current range from 0.1A to 10A auto constantcurrent,set stop discharge voltage range from 0V to 20V,when discharging LED can real timedisplay battery voltage ,Current,Power, AH and total time.When stop discharge LED display AHand discharge time.

  • TA-6500 - ADI Test Fixture

    Company: Tech-Aid Products

    The TA-6500 test fixture combines the features of the OEM's Instrument Servo Tester(T307962), the Pointer/Flag Test Fixture(T307951) and the AD-650/600 Test Panel(T334043) all into one panel to facilitate testing of these Attitude Director Indicator's. The panel switches and adjustment pots are labeled to match the test procedure numbers and the duplicity in marking makes it easier for the technician to understand each function. The UUT interface is through a 96 pin zero insertion force(ZIF) type connector to minimize contact wear. The expanded localizer and nav input pins J2-34/35 are exposed on the panel to facilitate the insertion of a 200 ohm shunt when required. The fixtures rear panel has connectors for the required dual API/Synchro transmitter interface while the panel switches provide the correct routing of each.

  • Durometers

    Company: PCE Instruments

    The durometers that you will find on our website are used for determining surface hardness. We have a selection of durometers for determining the hardness of metal, plastic, rubber, fabric, etc. These Hardness testers measure theThe Durometers that you will find on our webpages are used for determining surface hardness hardness in Rockwell B, Rockwell C, Vickers HV, Brinell HB, Shore, HS, Leeb HL or in hardness units (DIN ISO). These devices are especially practical in areas of production, quality control and technical service due to their portability. One advantage of a digital durometers is the internal rechargeable battery found in model PCE-1000. This device with integrated refraction impact offers the advantage of taking measurements without the use of cables that can interfere during a measurement.

  • Mooney Viscometer

    Company: Qualitest International

    The Mooney Viscometer measures the change in a rubber and plastic elastomer properties over time, from uncured to scorched state. The specimen is physically deformed by a rotating platen which will determine changing viscosity at preset temperatures. When the test is completed, the dies will automatically reset and allow for removal of the specimen. With the PID temperature controller you can assure that smooth and accurate data will be taken throughout the test. The servo-driven motors contribute to very accurate results; they are also quiet and require no maintenance. This tester is designed for easy maintenance; it is equipped with modular electrical boards, quick detachable upper and lower dies, calibration via computer and auto hardware detect features. The unit is safe as it is equipped with a transparent arc shield. With our Mooney viscometer you can ensure reliable results at an affordable price.

  • PM-800 - Optical Power Meter

    Company: Optokon A.s.

    The PM-800 optical power meter is designed to measure absolute or relative optical power in optical networks. The AWD (Auto Wavelength Detection) function facilitates the tester settings and eliminates the operator´s failure. The memory capacity allows storage and uploading of up to 3000 measurements including memory position or fiber number, wavelength, absolute value or relative value and insertion loss. The SmartProtocol PC evaluation software supports memory download and test report generation. The rechargeable battery ensures long term working with a minimum service life of 5 years. Batteries can be charged via a USB port or external AC/DC adaptor. The microprocessor controlled charging process ensures optimal battery status and extended operation time.

  • TM203 - Optical Power Meter

    Company: T&M Tools

    TM203 optical power meter is a new generation, high performance and handheld optical network tester which adopts the latest precision laser exploration and processing technology. It is a compositive optical power meter aimed at opening, maintenance, equipment research and development of optical network. It stays TM203’s design small dimension for easy carrying but have new features for wider power measurement, higher accuracy and have date and time display on the screen. It is calibrated at a large number of wavelengths to enable power measurements on a wide range of Single Mode and Multimode fiber optic cable systems. The TM203 optical power meter defines a new industry standard for Installing testing, maintaining single mode and multimode networks and cables.

  • RTTK - Real Time Platform for Machine Data

    Company: FishEye Software

    RTTK provides real-time X ray-like data access to unlock highly detailed binary data in the language of domain experts. FishEye’s technology captures real-time data in a system’s native binary but uses a unique and innovative Metadata ­Injection process to store the data in an open standards, platform independent, self-describing and high-performance data format. The access exposes internal data that otherwise may not be available to end-users, is distributed over system tasks and computers, or is challenging to collect because of the large volume. System developers can reduce development cost and risk by reducing time spent developing data capture functions, reduce post processing time by eliminating the post processing data conversion step, and quickly assess how the software is performing. Integrators and Testers can use internal data to diagnose problems, verify proper operation, and increase testing automation.

  • 303 Series - Relay Test System

    Company: SemiTek International

    The SemiTek 303-Relay Test System is PC-based and designed to test the integrity of electromechanical or coax relay devices. The system may be configured for multi-terminal testing right from the main station and the PC. With production and final test in mind, the 303-Relay Test System can perform an array of tests and control device output binning in a fraction of the time of any other tester on the market. Under program control, the test system can test: * Pull In/Drop Out * Contact Voltage Drop * Insulation Leakage * Variable AC Coil Frequency * Timing * Coil Resistance * Semiconductor * Isolation * Contact Resistance * Dielectric Withstanding. To maximize the system’s resources, multiple switching cards can be configured for additional test terminals (subject to space) allowing an operator to test at one site while prepping another. This helps to maximize the use of the system. In this configuration, each terminal may test the same or a different relay part.

  • CT100B - TDR Cable Analyzer

    Company: MOHR Test And Measurement

    The CT100B is special for two reasons: (1) It is the industry''s only high-resolution portable TDR providing step TDR impedance waveforms with resolution sufficient to show connector detail (~1 cm), and (2) it is the industry''s first portable TDR capable of making frequency domain S-parameter measurements including return loss (S11) and cable loss / insertion loss (S21). "High resolution TDR is extremely useful for detecting and localizing cable faults and characterizing cable and connector performance, but historically, portable TDRs have been unable to display OSL-calibrated S-parameter measurements," said Brandt Mohr, MOHR chief technologist. "The CT100B includes that capability, making it a very versatile instrument. If you can only carry one cable tester out into the field with you, it should be the CT100B."

  • 9363-LN-100 - Large-Displacement Low-Frequence Vibration System

    Company: King Design Industrial

    This tester is designed to assess the damage made to product packaging and internal objects caused from transporting environment; to discover the packaging flaw and product’s early failure from a long-term cumulative vibration fatigue; avoid man-made transporting damage and improve product’s reliability and quality of delivered products. With the use of high-performance foot absorber, the resonance effect to floor caused by the bounce test may be waived; and can reduce the pile’s destruction to industrial plants. Two displays can make comparative display on both frequency and rpm at the same time; thus no need to switch in order to read these two values. The dual-control mode of time accumulator and counter can avoid human error resulting from the conversion. Easy to operate; no need for complicate training program.

Products

Applications

Manufacturers