Showing results 5641 - 5655 of 5667 products found

  • 303 Series - Relay Test System

    Company: SemiTek International

    The SemiTek 303-Relay Test System is PC-based and designed to test the integrity of electromechanical or coax relay devices. The system may be configured for multi-terminal testing right from the main station and the PC. With production and final test in mind, the 303-Relay Test System can perform an array of tests and control device output binning in a fraction of the time of any other tester on the market. Under program control, the test system can test: * Pull In/Drop Out * Contact Voltage Drop * Insulation Leakage * Variable AC Coil Frequency * Timing * Coil Resistance * Semiconductor * Isolation * Contact Resistance * Dielectric Withstanding. To maximize the system’s resources, multiple switching cards can be configured for additional test terminals (subject to space) allowing an operator to test at one site while prepping another. This helps to maximize the use of the system. In this configuration, each terminal may test the same or a different relay part.

  • CT100B - TDR Cable Analyzer

    Company: MOHR Test And Measurement

    The CT100B is special for two reasons: (1) It is the industry''s only high-resolution portable TDR providing step TDR impedance waveforms with resolution sufficient to show connector detail (~1 cm), and (2) it is the industry''s first portable TDR capable of making frequency domain S-parameter measurements including return loss (S11) and cable loss / insertion loss (S21). "High resolution TDR is extremely useful for detecting and localizing cable faults and characterizing cable and connector performance, but historically, portable TDRs have been unable to display OSL-calibrated S-parameter measurements," said Brandt Mohr, MOHR chief technologist. "The CT100B includes that capability, making it a very versatile instrument. If you can only carry one cable tester out into the field with you, it should be the CT100B."

  • 9363-LN-100 - Large-Displacement Low-Frequence Vibration System

    Company: King Design Industrial

    This tester is designed to assess the damage made to product packaging and internal objects caused from transporting environment; to discover the packaging flaw and product’s early failure from a long-term cumulative vibration fatigue; avoid man-made transporting damage and improve product’s reliability and quality of delivered products. With the use of high-performance foot absorber, the resonance effect to floor caused by the bounce test may be waived; and can reduce the pile’s destruction to industrial plants. Two displays can make comparative display on both frequency and rpm at the same time; thus no need to switch in order to read these two values. The dual-control mode of time accumulator and counter can avoid human error resulting from the conversion. Easy to operate; no need for complicate training program.

  • NikOS Everest - Intelligence-Driven Data in Motion Analytics

    Company: Niksun

    NIKSUN NikOS Everest provides highly flexible, automated views on the data specific to you. No longer is the visualization tied to the data. You have complete freedom to filter, display, visualize, export and even run analytics right within the Everest GUI itself without having to perform ad-hoc special studies to obtain the data you want. Early adopters and testers have attested to NikOS Everest's expert value in the continuously evolving and highly competitive security industry. "NIKSUN NikOS Everest is one of the most robust unified platforms among cybersecurity tools today, providing the ability to render data at every level from a macroscopic view down to each individual packet," said Dr. Peter Stephenson, Chief Technology Editor at SC Magazine. "Not only does NikOS Everest have the ability to pull up this information at rapid speeds, but it also makes it far simpler to view and classify that data than ever before."

  • IAC-380 series - Intelligent AC Dummy Load

    Company: Fuzhou Fuguang Electronics

    For the varies of generators, gensets and UPS, the output power and loading capability test are very crucial in the acceptance inspection, performance analysis, replacing judgments of power supply devices. But for most of device ascendants, it is a tough issue in operating the tester and analyzing the results. Considered all difficulties for the users, IAC-380 series intelligent AC dummy load provide a scientific and convenient measure to check the power supply devices. Applying intelligent control technologies, IAC-380 series fulfill loading discharging and parameter checking simultaneously. After the test, PC analysis software can create data report automatically. It is widely available for high power UPS, inverters, diesel generators in many industries like telecommunication stations, power sectors, airport etc.

  • TA-552 - HSI Test Fixture

    Company: Tech-Aid Products

    This test fixture provides the necessary panel controls, switching and cable pin-outs required to test the KPI-552/KPI-553/A series of HSI's as described in their respective maintenance manuals. This fixture will serve as the "Instrument Bench Tester" and does have the required differential resolvers and relay switching. Panel jacks are provided for the Heading, Course, RMI and ADF synchro sources that are external to this fixture. The use of external synchro sources serves to minimize the cost of this panel. Additional items incorporated on the panel are test jacks to monitor the meter drive voltage and current as well as a momentary switch to open the meter drive and this serves to verify sticky meter stops. The fixtures rear panel provides for all power inputs as well as an I/O connector if the shop desires to interface an external synchro panel.

  • Test Engineering Service - Infrastructure

    Company: Tessolve Services

    Tessolve offers digital, mixed signal, wireless, and RF device test program development and implementation of test solutions from prototype characterization to full production on industry standard ATE Machines. Tessolve has the complete skill set to test radio frequency (RF) components, ICs, and modules. We have a different range of testers which gives the customer the flexibility of choosing a cost effective solution. Beyond IC Test services, we also have in-house design plus fab and assembly expertise to build test interface boards for testing and debugging of system level functionalities of new IC devices. We have a FIB and De-Cap systems for failure analysis and circuit edit, thus we eliminate employing multiple vendors to get your device tested.

  • TRA3000 - Transient Test System

    Company: HV Technologies

    IEC Test Equipment - Integrated Solutions, TRA3000 SeriesMeets latest EFT Waveform Verification Requirements – The perfect upgrade for your old tester!Modular Plug and Play design. Configure as needed now, add more circuits later using just a screw driver. No soldering. Ethernet interface with on-board web server and I/P addressing enables computer control from any computer with a web browser, even over your LAN! USB and RS232 interfaces included. Complete solution to IEC 61000-4-16 continuous and short duration test requirements. Full line of AUTOMATED three phase and I/O line CDN's up 100 Amps per phase.Configure with available accessories to meet some or all of the following CE MARK requirements:IEC 61000-4-2, -4, -5, -8, -9, -11, -16, -29

  • HTZZ-40A - Transformer Resistance Meter

    Company: Wuhan Huatian Electric

    Transformer Resistance Meter is an essential test project during transformer delivery, repair and changing tapping switch. Usually, it is a time consuming task to use traditional methods (bridge method and voltage drop method) to measure transformer winding and DC resistance of high-power inductive device. In order to change this situation: shorten measurement time and reduce the staff's workflow, our company has developed DC resistance rapid tester. The instrument using new power technology, with characteristics such as stable performance, rapid test, small size, light weight, easy operation, high measure precision and good data reproducibility, is the ideal equipment to measure transformer winding and DC resistance of high-power inductive device.This product complies with DL/T845.3-2004, national standards GB6587 "Environmental test general program of electronic measuring instruments" and GB6593 "Quality inspection provisions for electronic measuring instruments".

  • PV210 - Solar Installation Test Kit

    Company: Seaward Group USA

    The Seaward Solar PV210 PV installation tester provides a highly efficient and effective test and diagnostic solution for PV systems, carrying out all commissioning tests required by IEC 62446 and performing fast and accurate measurement of I-V curves in accordance with IEC 61829. With direct connection to individual PV modules or strings using the supplied lead sets, tests can be conducted easily and within a matter of seconds at the press of a single button. A high contrast display is clearly visible in direct sunlight and shows open circuit voltage, short circuit current, maximum power point voltage, current and power, as well as the fill factor of the PV module or system under test, and insulation resistance (as part of an auto sequence or a discrete probe to probe measurement). If the measured curve deviates from the expected profile, the PV210 alerts the user to this, identifying the need for further analysis.

  • ZC-410 - DC System Earth Fault Detector

    Company: Kvtester Electronics

    ZC-410 DC System Earth Fault Detector applies to all DC system in any voltage class ,equipped with high-precision tester ,expanded the tested range and strengthened the anti-interference ability by processing many kinds of signal.1. Applies to various voltage class, DC system 220V, 110V, 48V, 24V.2. Wide range of application, any power plant, transformer substation, colliery, chemical plant and others power supply departments.3. Easy to carry, the signal receiver equipped with battery, do not need external power source.4. DC system do not need power off when searching the earthing contact, do not affect the normal work of the system.5. Strong anti-jamming ability, without the effects by system distributed capacitance.

  • Digital Multimeters

    Company: Gardner Bender

    Equipped with an easy-to-read 3.5 inch backlit LCD digital display and magnetic holding strap making this tester ideal for automotive, appliance, circuit breaker, and other "hands-free" applications. In addition the multimeter features rubber housing to promote a steadfast comfortable grip while wrap-around lead holders keep leads at the ready. Snap-in probes spaced to fit a standard outlet provide quick and easy testing with one hand. Engineered with seven testing functions; AC Voltage to 500V, DC Voltage to 600V, Resistance to 20 meg Ohms, Diode, Continuity (includes audible indication), Temperature Probe (-40 to 1832 degrees F) and Battery Testing for 1.5 V batteries. The 7 position auto-ranging smooth rotary style achieves precise readings and the low battery indicator with auto-off function ensures an accurate read-out. Durable housing with a rubber boot is drop resistant to 6 ft and crush rated to 150 lbs.

  • S540 - Power Semiconductor Test System

    Company: Keithley

    The 540 Parametric Test System is a fully-automated, 48 pin parametric test system for wafer-level testing of power semiconductor devices and structures up to 3kV. Optimized for use with the latest compound power semiconductor materials including silicon carbide (SiC) and gallium nitride (GaN), the fully integrated S540 can perform all high voltage, low voltage, and capacitance tests in a single probe touch-down. S530 Parametric Test Systems are designed for production and lab environments that must handle a broad range of devices and technologies, offering industry-leading test plan flexibility, automation, probe station integration, and test data management capabilities. Keithley has brought more than 30 years of expertise in delivering a wide range of standard and custom parametric testers to customers around the world to the design of these test solutions.

  • 305M - 30 Amp FUSE BUDDYTM

    Company: Electronic Specialties

    Fuse Buddy Testers can test circuit current up to 30 Amps. Two 30 Amp models, #305M used with Mini size fuses and #306B used with ATC size fuses. Blowing fuses? Get the Fuse Buddy, a great new product. Clever design allows for easy connection into fuse sockets. 30 Amp models have resolution of .1A, while 20 Amp models have .01A resolution. Fuse Buddy ends are molded into the shape of the fuse itself. During testing the fuse is removed and replaced into the Fuse Buddy. This way, the circuit being tested maintains fuse protection. The Fuse Buddy stays put and won't fall out of the socket, like test probes do. 305M & 306B Specifications Tests circuit current from 0 to 30 Amps/48 Volts Resolution .1A (100 milliamps), accuracy + 2%

  • KD-128A - Air-arm-type Drop

    Company: King Design Industrial

    All new developing products must undergo several strict testing processes while in designing, manufacturing and packing/ shipping even. Our drop tester will provide data digitizing and analyzing of your drop and striking while the products in transportation. The testing data will help you improve the packing and buffer materials.Packaged drop test is applied to test the anti-vibration & covering capability of packaging material and the sufficiency of product’s impact-resisting capability regarding packaged products. And use the test result to determine how to improve the packaging design. Free drop test is used to assess the characteristics of product’s free fall from improper actions; and evaluate the required strength and toughness of product under safety conditions.Repeated free fall test is to simulate object’s condition after normal fall to hard surface.

Products

Applications

Manufacturers