NG Systems Ltd
Specialists in bespoke IP and conventional CCTV control solutions. We also produce the innovative and portable Ranger™ series of closed-circuit television test equipment.
- +44 (0)800 690 6264
- 18 Kensington Industrial Park
Southport, PR9 0NY
United Kingdom
Filter Results By:
Products
Applications
-
product
Focus Indicator
FM1
This unit will allow fine adjustment of overall focus of a CCTV camera, especially useful whenever a monitor is not available. It operates by analysing the detail in the centre of the picture and provides a 10 bar LED readout, displaying maximum output when the camera image is in sharpest focus. An input impedance switch provides selection between terminated (75Ω) and unterminated (high impedance) input.
-
product
Ground Loop Transformer - VT11
Humdinger
A wideband CCTV video-isolating transformer (ground loop transformer) used for the reduction of longitudinal mains induced hum. For high-resolution video signals and 'down the cable' telemetry it is essential that all components in the signal path are of sufficient bandwidth to pass the full frequency range of both signals with minimal distortion.
-
product
Multi-Format, Multi-Network CCTV Control Console
X2150
The X2150 is a multi-format desktop console offering centralised control of a wide variety of serial controlled CCTV peripheral equipment, removing the clutter of individual keyboards and controllers, often inherited from previous (or future) upgrades and refits.
-
product
Phase Meter
PM1
The Phase Meter PM1 provides a simple method of synchronising the field sync of two line locked CCTV cameras without the need of a dual-beam oscilloscope.
-
product
RS422/485 Converters
RS232
Each unit fitted with D9 female connector for interfacing directly to PC comms port and four-way terminal block to facilitate the twisted pair and power supply feed.
-
product
TCP/IP CCTV Equipment
BitNet
BitNet is a 4-bit digital to Ethernet converter that enables up to four, volt-free contact inputs to be transmitted on to a local area network (LAN). Each input is assigned a unique number to identify any contact that has closed or opened. A maximum of 16 BitNets may coexist on the LAN which will facilitate up to 64 volt-free inputs.
-
product
Video Level Meter
VLM1
This meter provides a direct reading in volts of peak white and sync levels of a CCTV signal on a 4 digit LCD display. An input impedance switch provides slection between terminated (75Ω) and unterminated (high impedance) input.
-
product
Add-On Autopan Board
AP1
An add-on board that provides an autopan function to any AC, fixed speed pan and tilt head fitted with limit switches. It functions by monitoring the current flow to the CCTV panning motor and selecting the alternate motor whenever the current ceases (i.e. limit switch is activated). This facilitates simpler wiring to the panning head without the need for additional switches or other components to be fitted to the head.
-
product
Cable Length Meter
CLM1
The Cable Length Meter CLM1 will allow the accurate measurement of severed or open/short-circuit CCTV coaxial cable. For use with RG59 (75Ω) and RG58 (50Ω) or equivalent coaxial cable, this meter provides a direct readout in metres of the length of an unterminated run of coaxial cable with a resolution of 2-3 metres. A single range of 2.5 to 400 metres on a 4 digit LCD display is provided with automatic indication of open circuit and short circuit conductors. By this means, the location of a short circuit or open circuit in cable runs of up to 800 metres may be found.
-
product
Test Card Generator
TCG1
This generator provides a standard 75O, 1-volt p-p; PAL encoded CCIR video signal for the testing of monitors and other CCTV equipment. The Test Card Generator TGC1 may display one of four test patterns , (i) Colour bars with reference, (ii) Red Raster, (iii) Peak White Raster and (iv) Composite Test Card (see picture below). The Test Card Pattern incorporates many of the attributes of broadcast test patterns for the evaluation and setting up of CCTV video equipment.
-
product
CCTV USB Joystick Controller
X3100
The NG Systems X3100 USB joystick controller is designed specifically for IP video surveillance systems and features a sturdy, 3-axis, industry standard joystick and 21 user-defined push buttons ergonomically arranged to suit many video applications (layout optimized for Milestone software).
-
product
PoE / Data Splitter
XPS1
The NG Systems PoE/Data Splitter (XPS1) is an installation device which allows PoE power to be delivered to a camera whilst allowing a direct connection to a laptop or other device (e.g. Pinger). This significantly simplifies camera configuration or lens focusing and shortens installation time.
-
product
Video Sensing Device
VideoStik VSS1
VideoStik is the latest addition to the successful Ranger series of CCTV test equipment from NG systems. This low-cost, battery-operated video sensing device will detect the presence of standard 1v p to p video by simply probing the BNC terminated cable.
-
product
USB CCTV Joystick Controller
X-Assist X3200
X-Assist is the latest, new generation USB joystick controller from NG Systems, specifically designed to provide maximum independent control of Milestone’s XProtect® video management software. It features 39 dedicated keys and an industry-standard, three-axis, multi-function joystick which operates as a standard PTZ controller in Live Mode and provides jog, shuttle and speed control functions in Playback Mode. Additional features include fast selection of View, Camera and Presets by name or number plus On-Screen Menus, Audio ‘Talk’ control and a special ‘Mouse’ mode that allows the joystick to function as a standard mouse pointing device.
-
product
CCTV Power Supply Cabinet
Powerbase12
The purpose-built 800x600x150mm steel enclosure is fitted with twelve quick-fit docking stations to accommodate a mixture of available power modules.
Parent
-
OnDis
OnDis is a range of products designed for retail that very specifically aid sales, loss prevention and has a “Call to Action” subliminal message for the end user.
