Pickering Interfaces Ltd.

Pickering Interfaces, a global company, designs and manufactures high-quality modular signal switching and simulation for use in electronic test and verification. We offer the largest range of switching and simulation products in the industry for PXI, LXI and PCI applications, with over 1,000 in PXI alone. Our products are specified in test systems installed throughout the world and have a reputation for providing excellent reliability and value.

Our commitment to delivering you high-quality products does not just extend to our switching and simulation products. We also offer a full range of supporting cable and connector solutions, diagnostic test tools and software, including our signal routing software, Switch Path Manager and software drivers.

Our products have a history of longevity, typically 15–20 years, which is critical to many of our customers. All products manufactured by us come with a standard 3-year warranty and include guaranteed long-term support.

Pickering serves many electronics industries, including automotive, aerospace & defense, energy, industrial, communications, medical and semiconductor. We operate globally with direct operations in the US, UK, Germany, Sweden, France, Czech Republic, and China—with additional representation in countries throughout the Americas, Europe and Asia.

  • +44 (0)1255 687900
  • Stephenson Road
    Clacton on Sea, CO15 4NL
    United Kingdom

Filter Results By:

Products

Applications

Showing recent results 841 - 855 of 1660 products found.

  • PXI 24 Channel High Voltage Multiplexer

    40-320-101 - Pickering Interfaces Ltd.

    The 40-310/320 Range of High Voltage Switching Modules will hot switch up to 750V peak and cold switch up to 1000V peak in either general purpose relay (40-310) or multiplexer (40-320) configurations. These modules contain high-quality reed relays with switching ratings comfortably higher than the 40-310/320 specification. Applications for the 40-310/320 series modules include; circuit board isolation testing, relay testing, semiconductor breakdown monitoring and cable harness insulation testing.

  • PXI Dual 2 x 2 Fibre Optic Mux SC/PC

    40-860-222 - Pickering Interfaces Ltd.

    Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

  • Dual 4 to 1 50 600MHz PXI RF Multiplexer

    40-760-002 - Pickering Interfaces Ltd.

    This 4 to 1 multiplexer is part of a range of RF multiplexers available in the following configurations: dual, quad and octal 4 to 1, single, dual and quad 8 to 1, single and dual 16 to 1 and single 32 to 1. All multiplexers have the option of automatic terminations which offer advantages at system level by reducing the presence of standing waves in the system which can cause degradation in isolation and crosstalk. These RF multiplexers exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 600MHz with each path having a nominally equal insertion loss. The injection of noise and unwanted signals into the signal paths has been minimized by careful attention to the mechanical and electrical design. User connections are made via SMB connectors; you can find the associated RF cable & connector accessories data sheet under the downloads tab above.

  • Dual 4 to 1 Terminated 50 600MHz PXI RF Multiplexer

    40-761-002 - Pickering Interfaces Ltd.

    This 4 to 1 multiplexer is part of a range of RF multiplexers available in the following configurations: dual, quad and octal 4 to 1, single, dual and quad 8 to 1, single and dual 16 to 1 and single 32 to 1. All multiplexers have the option of automatic terminations which offer advantages at system level by reducing the presence of standing waves in the system which can cause degradation in isolation and crosstalk. These RF multiplexers exhibit low insertion loss and VSWR through the use of modern RF relay technology at an affordable cost. Each MUX has been carefully designed to ensure excellent and repeatable RF characteristics to frequencies of 600MHz with each path having a nominally equal insertion loss. The injection of noise and unwanted signals into the signal paths has been minimized by careful attention to the mechanical and electrical design. User connections are made via SMB connectors; you can find the associated RF cable & connector accessories data sheet under the downloads tab above.

  • PXI Programmable Resistor Card 4-Channel 2 Ohm to 510 Ohm

    40-294-014 - Pickering Interfaces Ltd.

    These PXI Programmable Resistor modules are available with either two channels of 16-bit, two channels of 12-bit or four channels of 8-bit resistor chains in a single 3U PXI module. The module is ideal for simulating sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications. The 40-294 can also be supplied with 8xSPST reed relays. These uncommitted relays have a number of uses, including extending the resistor chain, adding additional fault conditions and providing the functionally of a resistor module and an uncommitted relay module in a single PXI slot.

  • PXI Breadboard Module, 2-Slot, No Connector

    40-220A-102 - Pickering Interfaces Ltd.

    Versatile PXI Breadboard with 65 sq cm (10 sq in) of Prototype AreaSelection of Industry Standard Connectors AvailableAccess to All PXI Power Supplies (+3.3, +5, +12and -12VDC)Built-In Digital I/O - 32-Bits Out, 32-Bits In, TTL or TransistorTTL Outputs Suitable for Driving External LogicOpen Collector Transistor Outputs Suitable for Driving Internal or External Relay CoilsVISA, IVI and Kernel Drivers Supplied for WindowsSupported by PXI or LXI Chassis3 Year WarrantyAlso Available, 40-225A Prototype Module, Has All Circuitry Removed

  • PXI BRIC8 FIBO Matrix Dual 124x4 2pin brkout

    40-592A-114 - Pickering Interfaces Ltd.

    The 40-592A FIBO (Fault Insertion Break-Out) Matrix Module is a large-scale high density switching matrix based on the Pickering BRIC format. The fault insertion BRICs are designed for applications requiring the simulation of a variety of faults in complex, high pin count, applications involving sensors and control units. Typical faults that can be simulated are open-circuits, short circuits to ground or battery, or short-circuits between input/output lines. Typical applications are in automotive and aerospace industries which involve safety or mission critical systems that have to behave predictably when cabling or sensor faults occur.

  • PXI Quad 2 Channel Fibre Optic MU

    40-855-342 - Pickering Interfaces Ltd.

    Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

  • PCI to Star Fabric Module

    51-921-001 - Pickering Interfaces Ltd.

    Supports two PXI chassis from a single PCI card2.5Gb/s StarFabric serial interface ensures fast operationSupports 32/64 Bit & 33/66 MHz PCI interfacingUses RJ45 connectors, shielded Cat 5E cablesOperating system independentLow power consumption, supporting 5V and 3.3V PCIMates with single slot 3U PXI Card

  • PXI Single 2 Channel Fibre Optic MU

    40-855-312 - Pickering Interfaces Ltd.

    Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

  • PXI 10A Fault Insertion Switch 10-Chan 2-Bus

    40-199-002 - Pickering Interfaces Ltd.

    The 40-199 is a 10 Channel Fault Insertion switch designed for the simulation of fault conditions in automotive/avionics applications, involving the reliability testing of safety critical controllers. It is designed to be able to insert 3 different fault conditions between the test fixture and the equipment under test: Open-Circuit, Short-Circuit between UUT connections, Short-Circuit to other signals such as Power, Ignition & Ground via Fault Insertion Bus.

  • PXI Single 2 Channel Fiber MUX SC

    40-855-212-M - Pickering Interfaces Ltd.

    Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

  • PXI Single 16 Channel Switch Simulator

    40-485-221 - Pickering Interfaces Ltd.

    Available as 1 or 2 banks of 8 or 16 switch simulator channelsSimulates Leaky or Dirty SwitchesProtects UUT From Fault ConditionsRobust Design Protects Against Faults In DUTSuitable for 12V and 24V SystemsSuitable for Switch Simulation in Transport Electronics Module TestingVISA, IVI and Kernel Drivers Supplied for WindowsSupported by PXI or LXI Chassis

  • Star Fabric To PXI Module

    41-921A-001 - Pickering Interfaces Ltd.

    Supports two PXI chassis from a single PCI card2.5Gb/s StarFabric serial interface ensures fast operationSupports 32/64 Bit & 33/66 MHz PCI interfacingCompatible with Windows 7 32/64-BitUses RJ45 connectors, shielded Cat 5E cablesOperating system independentLow power consumption, supporting 5V and 3.3V PCISingle slot 3U PXI

  • PXI RTD Simulator Module 12-Channel PT1000

    40-262-202 - Pickering Interfaces Ltd.

    The 40-262 is a 3U PXI module range that supports 6 (in one slot), 12 or 18 (in two slots) channels of RTD simulation. Based on the 40-260 design principles the module can provide a setting resolution of <8m (PT100) or <90m (PT1000) and a resistance accuracy of better than 0.1% on all channels. Each simulation channel is able to provide a short or open circuit setting to simulate faulty wiring connections to a sensor. Calibration or verification of each resistor channel can be verified by using the calibration port connected to a high performance DMM and a supplied software package. Each module can be specified with a resistance range of either 90 to 250 suitable for PT100 simulation (40-262-001/201/101),or 900 to 2500 suitable for PT1000 simulation (40-262-002/202/102). Both resistance ranges are suitable for simulatinga temperature range of approximately -25C to 410C for their given sensor type. The use of resistance value calls makesprogramming simple, an API to convert temperature requests to resistance calls using a model of the sensor being used isalso available. Each channel can operate with a differential input voltage range of greater than 15V relative to a definedcommon mode voltage. The common mode voltage can be set to 0V, (input range of at least 15V), +12V (input range of -3V to+27V), -12V (input range of -27V to +3V) or an external comm>