Average Power Sensors
E9300 - Keysight Technologies
Operates with the EPM, EPM-P and P-series power meters Wide dynamic range sensors (80 dB maximum)Accurate average power measurements on all modulation formats Wide frequency coverage from 9 kHz to 18 GHz (special option to 24 GHz)Calibration factors stored in EEPROM Fast measurement speed over the GPIB (up to 400 readings per second with the E4416A)
- Power Meters & Power Sensors
- Average Power Sensors
- 10 MHz to 18 GHz USB Peak and Average Power Sensor
- 10 MHz to 18 GHz USB Wide Dynamic Range Average Power Sensor
- 10 MHz to 6 GHz USB Peak and Average Power Sensor
- 10 MHz to 6 GHz USB Wide Dynamic Range Average Power Sensor
- CW Power Sensors
- EPM and EPM-P Series Power Meter
- Handheld RF Power Meter
- Peak and Average Power Sensors
- Power Meter
- Power Sensors
- Power Sensors
- P-Series Wideband Power Sensors
- USB & LAN Power Sensor
- VDI Erickson PM5B MM–Wave Power Meter with W-Band Sensor, Optional Tapers to 1.5 THz
- Waveguide Power Sensor
- 110 GHz Frequency Extender
- Accessories
- AC Power Analyzers
- AC Power Sources
- Application-Specific Test Systems & Components
- Arbitrary Waveform Generators
- AXIe Products
- Basic Spectrum Analyzers
- Bit Error Ratio Testers
- Cases & Covers
- Coaxial Terminations (Loads)
- CW Power Sensors
- Data Acquisition DAQ
- Data Acquisition / Data Logger Switch Unit
- DC Electronic Loads
- DC Power Solutions
- DC Power Supply
- DC Power Supply
- Design & Test Software
- Device Current Waveform Analyzers
- Digital Multimeters
- EasyEXPERT group+ Device Characterization Software
- Femto / Picoammeter and Electrometer / High Resistance Meter
- Femto / Picoammeter And Electrometer Meters
- Frequency Counter Products
- General Measurement Software
- Handheld Insulation Resistance Testers
- HEV / EV / Grid Emulators and Test Systems
- High-Speed Digitizers and Multichannel DAQ Solutions
- I3070 In-Circuit Test System Software
- In-circuit Test
- In-Circuit Test Systems
- Infiniium Oscilloscopes
- InfiniiVision Oscilloscopes
- Instrument Measurement Software
- Laser Interferometers & Calibration Systems
- LCR Meters And Impedance Measurement Products
- Logic Analyzers
- MMIC (Monolithic Microwave Integrated Circuit) Millimeter-Wave & Microwave Devices
- Modular Solar Array Simulators
- Monolithic Laser Combiners & Precision Optics
- Multifunction Switch / Measure Unit, Modules
- Nemo Wireless Network Solutions
- Network Analyzers
- Network Analyzer Software
- Network Test and Security
- Noise Figure Analyzers & Noise Sources
- Optical Power Meter Heads
- Oscilloscopes
- Parameter And Device Analyzers, Curve Tracers
- Parametric Test Solutions
- PathWave BenchVue Software
- PCI Express® 2.0 Protocol Test
- PCI EXPRESS® Protocol Solutions
- Phase Noise Measurement Solutions
- Photonic Test & Measurement
- Propsim Channel Emulation Solutions
- Protocol Analyzer and Exerciser
- Pulse Generators
- PXI Avionics Databus Modules
- PXI Products
- PXI Software
- Reference Solutions
- Signal Generators (Signal Sources)
- Source / Measure Units
- Spectrum Analyzers (Signal Analyzers)
- Streamline Series Vector Network Analyzers
- Training Kits
- USB Modular Data Acquisition
- USB Products
- VXI Products
- Waveform/Function Generators
- Wireless Network Emulators
- X-Series Measurement Applications for EXM and EXF
-
product
E-Series Average Power Sensor
E9300H
Measure the average power of all modulation formats Wide dynamic range power measurements from -50 dBm to +30 dBm Frequency range 10 MHz to 18 GHzLow SWR for reducing mismatch uncertainty Calibration factors, linearity and temperature compensation data stored in EEPROM Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
-
product
E-Series Average Power Sensor
E9304A
Refer to the E9301A for standard power sensor features Low frequency coverage (9 kHz to 6 GHz) for EMC/EMI test applications such as the radiated immunity test (IEC61000-4-3)High sensitivity (-60 to +20 dBm) and fast measurement speed to reduce the time taken to calibrate radiated field uniformity and EMC/EMI test receivers Measure transmitter power and receiver sensitivity at Very Low Frequency (VLF) to microwave frequencies Special option available to 18 GHz Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
-
product
E-Series Average Power Sensor
E9301A
Measure the average power of all modulation formats Wide dynamic range (-60 dBm to +20 dBm) and frequency range 10 MHz to 6 GHzHigh maximum power specification Low SWR for reducing mismatch uncertainty Calibration factors linearity and temperative compensation data stored in EEPROM Fast measurement speeds (up to 400 readings per second with the Keysight E4416A)Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
-
product
E-Series Average Power Sensor
E9300A
The E9300A diode power sensor measures average power over the frequency range 10 MHz to 18 GHz and power range -60 to +20 dBm (80 dB dynamic range).
-
product
E-Series Average Power Sensor
E9301H
Measure the average power of all modulation formats Wide dynamic range power measurements from -50 dBm to +30 dBm10 MHz to 6 GHz frequency coverage for Wireless Comms formatsLow SWR for reducing mismatch uncertainty Calibration factors, linearity and temperature compensation data stored in EEPROM Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
-
product
E-Series Average Power Sensor
E9301B
Measure the average power of all modulation formats Wide dynamic range power measurements from -30 dBm to +44 dBm10 MHz to 6 GHz frequency coverage for Wireless Comms formats Low SWR for reducing mismatch uncertainty Calibration factors, linearity and temperature compensation data stored in EEPROM Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
-
product
E-Series Average Power Sensor
E9300B
Measure the average power of all modulation formats Wide dynamic range power measurements from -30 dBm to +44 dBm Frequency range 10 MHz to 18 GHzLow SWR for reducing mismatch uncertainty Calibration factors, linearity and temperature compensation data stored in EEPROM Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
