Test Fixtures & Test Sets
Keysight test fixtures are used to hold electronic components or materials (physically and electrically) in order to perform various measurements. Keysight offers a variety of test fixtures from Parametric, Dialectrice, Liquid test fixtures and more.
Some of our test fixtures allow you to connect directly to your measurement instrument, while others require various adapters.
- Accessories
- Test Fixtures & Test Sets
- 10-GHz Split Cylinder Resonator
- 200 Vdc External Voltage Bias Fixture
- 34945A Distribution Board, With Generic Screw Terminals For Driving 16 Switch Coils
- 34945EXT Distribution Board, For One 87204x/206x Or 87606B Switch And Two N181x Switches
- 34945EXT Distribution Board, For Two 87104x/106x L7x0xx Multiport Or 87406B Matrix Switches
- 34945EXT Distribution Board, For Two 87222, L7222C Transfer Switches And Six N181x SPDT Switches
- Bottom Electrode SMD Test Fixture
- Bottom Electrode SMD Test Fixture
- Component Test Fixture For N1413 With B2980 Series
- Dielectric Material Test Fixture
- Dielectric Test Fixture
- Distribution Board, For 8 N181x SPDT Switches
- Magnetic Material Test Fixture
- Parallel Electrode SMD Test Fixture
- Parallel Electrode SMD Test Fixture, DC To 3 GHz
- Parallel Electrode SMD Test Fixture, DC To 3 GHz
- Parallel Electrode SMD Test Fixture, DC To 3 GHz
- Parallel Electrode SMD Test Fixture, DC To 3 GHz
- Parametric Test Fixture
- Pattern Generator Remote Head 32 and 17 Gb/s
- SMD Array Type LCR Test Fixture
- SMD Test Fixture
- Test Fixture
- Test Fixture
- Test Fixture, Axial And Radial
- Test Fixture (SMD Components)
- Test Port Adapter Set, 1.85 Mm To 1.85 Mm
- Test Port Adapter Set, 2.4 Mm To 2.4 Mm
- Test Port Adapter Set, 2.4 Mm To 3.5 Mm
- Test Port Adapter Set, 3.5 Mm (Test Port) To Type-N
- Test Port Adapter Set, 3.5 Mm To 3.5 Mm
- 110 GHz Frequency Extender
- 110 GHz Frequency Extender
- 110 GHz Frequency Extender, Pulsed DC Bias
- 110 GHz Frequency Extender, Pulsed DC Bias
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 2U Dual Flange Kit
- 30 A Current Shunt
- Accessories For DCA Oscilloscopes Family
- Accessories For RF And Microwave Handheld Analyzers
- Adapters and Connectors
- Air Temperature Probe
- Alligator Clips
- Amplifiers
- Attenuators
- Bias Networks
- Cables, Cable Assemblies, and Leads
- Calibration Modules and Kits
- Chassis and Controllers Accessories
- Comb Generators
- DC Blocks
- Detectors
- Directional Couplers & Bridges
- Economy Mechanical Calibration Kit, DC To 3 GHz, Type-F, 75 Ohm
- Extreme Temperature Active Probe, 1.5 GHz
- Frequency Meters
- Handheld Digital Multimeter, Soft Carrying Case
- Immersion Temperature Probe
- Industrial Surface Temperature Probe
- Interface Cards, Cables, and Modules
- Interposers
- IR Connectivity Bracket For U1240 Series Handheld Digital Multimeters
- Lithium-Ion Battery Pack, B2983 / B2987
- Power Dividers & Splitters
- Power Limiters
- Probes and Probe Accessories
- Racks, Rackmount Kits, and Rack Accessories
- Resistivity Cell For N1413 (26/50 Mm Electrodes)
- Resistivity Cell For N1413 (50 Mm Electrodes)
- Resistivity Cell For N1413 With B2980 Series (26/50/76 Mm Diameter Electrodes)
- RF Electronic Calibration Module (ECal), DC/300 KHz To 9 GHz, Type-N, 2 Port
- RF Electronic Calibration Module (ECal), DC To 13.5 GHz, 4-ports
- Smart Harmonic Mixers
- Soft Carrying Case, 4-5/7 In. D, Black
- Spring Clip Fixture
- Switches
- Temperature Module
- Temperature Probe Adapter
- Terminal Blocks
- Terminations (Loads)
- Test Probe Leads, With 19-mm Tips And 4-mm Tips
- Thermistor Kit
- Thermocouple Kit
- Thermocouple (K-Type) And Temperature Probe Adapter
- Transition Time Converters
- Test Fixtures & Test Sets
- 110 GHz Frequency Extender
- AC Power Analyzers
- AC Power Sources
- Application-Specific Test Systems & Components
- Arbitrary Waveform Generators
- AXIe Products
- Basic Spectrum Analyzers
- Bit Error Ratio Testers
- Cases & Covers
- Coaxial Terminations (Loads)
- CW Power Sensors
- Data Acquisition DAQ
- Data Acquisition / Data Logger Switch Unit
- DC Electronic Loads
- DC Power Solutions
- DC Power Supply
- DC Power Supply
- Design & Test Software
- Device Current Waveform Analyzers
- Digital Multimeters
- EasyEXPERT group+ Device Characterization Software
- Femto / Picoammeter and Electrometer / High Resistance Meter
- Femto / Picoammeter And Electrometer Meters
- Frequency Counter Products
- General Measurement Software
- Handheld Insulation Resistance Testers
- HEV / EV / Grid Emulators and Test Systems
- High-Speed Digitizers and Multichannel DAQ Solutions
- I3070 In-Circuit Test System Software
- In-circuit Test
- In-Circuit Test Systems
- Infiniium Oscilloscopes
- InfiniiVision Oscilloscopes
- Instrument Measurement Software
- Laser Interferometers & Calibration Systems
- LCR Meters And Impedance Measurement Products
- Logic Analyzers
- MMIC (Monolithic Microwave Integrated Circuit) Millimeter-Wave & Microwave Devices
- Modular Solar Array Simulators
- Monolithic Laser Combiners & Precision Optics
- Multifunction Switch / Measure Unit, Modules
- Nemo Wireless Network Solutions
- Network Analyzers
- Network Analyzer Software
- Network Test and Security
- Noise Figure Analyzers & Noise Sources
- Optical Power Meter Heads
- Oscilloscopes
- Parameter And Device Analyzers, Curve Tracers
- Parametric Test Solutions
- PathWave BenchVue Software
- PCI Express® 2.0 Protocol Test
- PCI EXPRESS® Protocol Solutions
- Phase Noise Measurement Solutions
- Photonic Test & Measurement
- Power Meters & Power Sensors
- Propsim Channel Emulation Solutions
- Protocol Analyzer and Exerciser
- Pulse Generators
- PXI Avionics Databus Modules
- PXI Products
- PXI Software
- Reference Solutions
- Signal Generators (Signal Sources)
- Source / Measure Units
- Spectrum Analyzers (Signal Analyzers)
- Streamline Series Vector Network Analyzers
- Training Kits
- USB Modular Data Acquisition
- USB Products
- VXI Products
- Waveform/Function Generators
- Wireless Network Emulators
- X-Series Measurement Applications for EXM and EXF
-
product
Test Fixture
N1295A
The Keysight N1295A Device/Component Test Fixture provides a low-cost solution to quickly and easily test packaged devices and components. For more advanced packaged testing needs, the Keysight 16442B Test Fixture provides more capabilities.
-
product
Test Port Adapter Set, 3.5 Mm (Test Port) To Type-N
85130C
The Keysight 85130C test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged female connector designed for connecting to the network analyzer test port. This special connector will not mate with a standard male connector, but converts the rugged test set port to a connection that can be mated with the device under test. The set contains a 3.5 mm to type-N male adapter and a 3.5 mm to type-N female adapter. The frequency range for these adapters is dc to 18 GHz with a return loss of 28 dB or better.
-
product
Test Port Adapter Set, 3.5 Mm To 3.5 Mm
85130D
The Keysight 85130D test port adapter protects the test set port from being directly connected to the device under test. These adapters have a special rugged female connector that connects to the network analyzer test port. This special connector does not mate with a standard male connector but converts the rugged test set port to a connection that will mate with the device under test. This set contains a 3.5 mm to PSC-3.5 mm male adapter and a 3.5 mm to PSC-3.5 mm female adapter. The frequency range for these adapters is dc to 26.5 GHz with a return loss of 28 dB or better.
-
product
Test Port Adapter Set, 2.4 Mm To 3.5 Mm
85130F
The Keysight 85130F test port adapter protects the test set port from connecting directly with the device under test. It has a special rugged female connector designed for connecting to the network analyzer test port. This special connector does not mate with a standard male connector but converts the rugged test set port to a connection that will mate with the device under test. The set contains a 2.4 mm to PSC-3.5 mm male adapter and a 2.4 mm to PSC-3.5 mm female adapter. The frequency range for these adapters is dc to 26.5 GHz with a return loss of 26 dB or better.
-
product
Test Port Adapter Set, 2.4 Mm To 2.4 Mm
85130G
The Keysight 85130G test port adapter protects the test set port from connecting directly with the device under test. It has a special rugged female connector that connects to the network analyzer test port. This special connector does not mate with a standard male connector but converts the rugged test set port to a connection that will mate with the device under test. This set contains a NMD-2.4 mm (f) to NMD-2.4 mm (m) adapter and a NMD-2.4 mm (f) to PSC-2.4 mm (f) adapter. The frequency range for these adapters is dc to 50 GHz with a return loss of 23 dB or better.
-
product
Test Port Adapter Set, 1.85 Mm To 1.85 Mm
85130H
The Keysight 85130H test port adapter protects the test set port from being directly connected to the device under test. This adapter has a special rugged female connector that connects to the network analyzer test port. This special connector does not mate with a standard male connector but converts the rugged test set port to a connection that will mate with the device under test. This set contains a 1.85 mm to 1.85 mm male adapter and a 1.85 mm to 1.85 mm female adapter. The frequency range for these adapters is dc to 67 GHz with a return loss of 23 dB or better.
-
product
Test Fixture (SMD Components)
16034E
Perform impedance evaluation on a minimum SMD size of 1.6(L) x 0.8(W) [mm]
-
product
SMD Test Fixture
16034G
Perform impedance evaluation on a minimum SMD size of 0.6(L) x 0.3(W) [mm]
-
product
SMD Array Type LCR Test Fixture
16034H
The 16034H is designed for impedance evaluations of array-type SMD.The minimum SMD size that this fixture is adapted to evaluate is 1.6(L)x0.8(W)[mm]. Since the tip of the measurement electrodes are very thin and the device holder is extremely flat, the device can be shifted and the measurement electrodes can contact each of the elements of the array-type component.
-
product
Parallel Electrode SMD Test Fixture
16192A
The 16192A test fixture is designed for impedance evaluations of side electrode SMD components. The minimum SMD size that this fixture is adapted to evaluate is 1(L)[mm].
-
product
Parallel Electrode SMD Test Fixture, DC To 3 GHz
16196A
The 16196A surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results - reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement - now with the 16196 series, it’s easy to perform accurate and repeatable measurements.
-
product
Parallel Electrode SMD Test Fixture, DC To 3 GHz
16196B
The 16196B surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results, reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement. Now with the 16196 series, it’s easy to perform accurate and repeatable measurements.
-
product
Parallel Electrode SMD Test Fixture, DC To 3 GHz
16196C
The 16196C surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results - reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement - now with the 16196 series, it’s easy to perform accurate and repeatable measurements.
-
product
Parallel Electrode SMD Test Fixture, DC To 3 GHz
16196D
The 16196D surface mount devices (SMD) test fixture offers excellent repeatability and usability, with accurate correlation up to 3 GHz. 16196 series fixtures are custom designed to fit specific SMD sizes (see table below), and provide repeatable DUT positioning with reliable contacts to enable stable measurement results – reducing the possibility of operator-induced error. Traditionally, SMD inductor evaluation up to 3 GHz has been difficult to implement – now with the 16196 series, it’s easy to perform accurate and repeatable measurements.
-
product
Bottom Electrode SMD Test Fixture
16197A
The 16197A is designed for impedance evaluations of bottom electrode SMDs. It achieves stable frequency characteristics up to 3 GHz and provides highly repeatable measurements. The Keysight 16197A supports various SMD sizes, as small as 1005 (mm)/0402 (inch) and as large as 3225 (mm)/1210 (inch). Accommodation of the 0603 (mm)/0201 (inch) size is available with option 001.
-
product
Bottom Electrode SMD Test Fixture
16198A
Designed for impedance evaluations of bottom electrode SMDs and supports 201 (mm) and 402 (mm) sizes
-
product
Distribution Board, For 8 N181x SPDT Switches
Y1150A / 34945EXT
Connects the 34945EXT to 8 N181x SPDT to route the power and control signals from the driver module to the switches
-
product
34945EXT Distribution Board, For Two 87104x/106x L7x0xx Multiport Or 87406B Matrix Switches
Y1151A
The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.
-
product
34945EXT Distribution Board, For One 87204x/206x Or 87606B Switch And Two N181x Switches
Y1152A
The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.
-
product
34945EXT Distribution Board, For Two 87222, L7222C Transfer Switches And Six N181x SPDT Switches
Y1154A
The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.
-
product
34945A Distribution Board, With Generic Screw Terminals For Driving 16 Switch Coils
Y1155A
The Y1150A-Y1155A distribution boards enable simple connections to the external switches. The distribution boards plug onto the 34945EXT and are used to route the power and control signals from the driver module to the switches using standard cables.
-
product
10-GHz Split Cylinder Resonator
85072A
The Keysight 85072A 10-GHz split cylinder resonator measures permittivity and loss tangent of thin film, un-clad substrates and low loss sheet materials according to the IPC TM-650 2.5.5.13 test method. Designed for robustness and ease of use, it features precision cylinders to ensure high Q factor and loss tangent resolution. Compatible with the Keysight 85071E-300 materials measurement software, the 85072A and can be purchased separately or as part of a complete turn-key solution.
-
product
Dielectric Material Test Fixture
16453A
The 16453A is designed for accurate dielectric constant and loss tangent measurements on the E4991A/4291A/B. It employs the parallel plate method, which sandwiches the material between two electrodes to form a capacitor. The E4991A/4291A/B measures the capacitance created from the fixure, and option 002 firmware calculates the relative complex permittivity as described in the 16451B. Adjustment to insure parallel electrodes is required when using the 16451B. This adjustment is not required with the 16453A because the fixure has a flexible electrode that adjusts automatically to the material surface.
-
product
Dielectric Test Fixture
16451B
The 16451B is used to evaluate the dielectric constant of solid dielectric materials accurately, and complies with ASTM D150. The 16451B employs the parallel plate method, which sandwiches the material between two electrodes to form a capacitor. An LCR meter or an impedance analyzer is then used to measure the capacitance created from the fixture.
-
product
Magnetic Material Test Fixture
16454A
The 16454A is designed for accurate permeability measurements of toroidal-shaped magnetic materials. Since the construction of this fixture creates one turn around the toroid (with no magnetic flux leakage), the need of winding a wire around the toroid is unnecessary. Complex permeability is calculated from the inductance with and without the toroid. When the E4991A/4291B with option 002 is used as the measurement instrument, direct readouts of complex permeability are possible. In addition, it is furnished with a small and a large fixture to adapt to a wide range of sizes.
-
product
Parametric Test Fixture
U2941A
The Keysight U2941A is a parametric test fixture that is designed to complement the usage of U2722A USB source measure unit in the testing of semiconductor components, including SMT and DIP ICs.
-
product
Pattern Generator Remote Head 32 and 17 Gb/s
N4951B
The N4951B is an affordable and compact pattern generator remote head available in 4 to 17 Gb/s and 5 to 32 Gb/s configurations. Compatible with the N4960A Serial BERT controller, it is the perfect solution to test up to 32 Gb/s per channel for 100 Gigabit Ethernet applications and other high-data rate devices. The N4951B pattern generator supports PRBS or user patterns and operates up to 32 Gb/s in a single band with no gaps or missing data rates. The remote head allows the test equipment to be located very close to the device under test, eliminating the need for long cables that degrade signal quality.
-
product
Component Test Fixture For N1413 With B2980 Series
N1428A
The N1428A is designed to operate specifically with the B2985B / 87B electrometer / high resistance meter. It is provided with two component modules, which are used to hold SMD, lead, and various types of devices. Electrical noise effects are reduced by the employment of a shielded case. A built-in interlock circuit enables safe high-voltage measurements. The N1413A high resistance meter fixture adapter is also required to connect the N1428A to the B2985B / 87B.
-
product
Test Fixture
16047E
Perform impedance evaluation of lead type devices of up to 120 MHz; includes a guard and a shorting plate
-
product
Test Fixture, Axial And Radial
16047A
The 16047A is designed for impedance evaluation of axial/radial lead type devices of up to 13MHz. The 16047A employs Kelvin contacts which realize a wide impedance measurement range. The contact tip can be changed according to the device shape.
-
product
200 Vdc External Voltage Bias Fixture
16065A
Measure a DUT with up to +/-200 V DC bias and also measure axial/radial lead components
