G6 - 6 Module Solution
Virginia Panel Corporation (VPC)
This 6 Module Solution provides versatility in a small footprint and can simultaneously engage up to 1,440 signal contacts. The Vertical Hinged Mounting Frame Configuration is suitable for rack or chassis mount applications and offers quick access to resources and cables. The ITA has a unique, removable, EMI shielded cover which allows easy access to modules and contacts.
- Receivers / ITAs
- Low I/O Solutions
- G6 - 6 Module Solution
- Enclosure, G6, 2 Cable Clamps, 6" Depth (for ITA p/n 410104331)
- Enclosure, G6, Hinged Cover, 4" Depth, No Cable Exits (for ITA p/n 410104331)
- ITA, G6, 6 Module
- ITA, G6, 6 Module, EMI
- ITA, G6, 6 Module, Oversized Backshell
- ITA, G6, 6 Module, With Protective Cover
- Keying Pin Kit, Receiver/ITA
- Protective Cover, G6, Receiver
- Receiver, G6, 6 Module, EMI
- Receiver, G6, 6 Module, Keying Feature, includes Micro Switch
- Receiver Kit, G6 Receivers X 2 , Mounted on Slide Mount Panel (slide kit required)
- Replacement Protective Cover, G6, ITA
- Vertical Hinged Mounting Frame, G6, 5U, 1 Position
- Vertical Hinged Mounting Frame, G6, 5U, 2 Positions
- G10 - 10 Module Solution
- G10x - 15 Module Solution
- G2- 2 Module Solution
- G6x - 9 Module Solution
- G6 - 6 Module Solution
- Accessories
- Docking / ATE
- High I/O Solutions
- iSeries
- Platform Solutions
- Pull Thru Solutions
- Low I/O Solutions
- Cable Assemblies - Receiver
- Contacts
- High Speed Digital
- Modules
- PCB & Wire Solutions
- Tools
-
product
Protective Cover, G6, Receiver
310113158
The Receiver Protective Cover is optional to keep your modules and contacts enclosed when the Receiver is not in use.
-
product
Replacement Protective Cover, G6, ITA
410112684
The provided vinyl ITA Protective cover protects your contacts and modules when the ITA is not in use.
-
product
Vertical Hinged Mounting Frame, G6, 5U, 1 Position
310113341
This G6 Vertical Hinged Mounting Frame is for use with standard rack or PXI chassis. These mounting frames attach to flanges supplied by the chassis manufacturer and allow the receiver to hinge down for wiring access.
-
product
Vertical Hinged Mounting Frame, G6, 5U, 2 Positions
310113397
This 2-position G6 Vertical Hinged Mounting Frame is for use with standard racks or PXI chassis. These mounting frames attach to flanges supplied by the chassis manufacturer and allow the receiver to hinge down for wiring access.
-
product
Keying Pin Kit, Receiver/ITA
310118112
The Keying Pin kit is a way to avoid damaging the contacts within the ITAs and Receivers. Simply insert the longer keying pins into the receiver and the smaller set screws into the ITA to create the pattern needed to isolate your test fixtures so there is no operational mismatch.
-
product
Enclosure, G6, 2 Cable Clamps, 6" Depth (for ITA p/n 410104331)
410112237
Enclosure, G6, 2 Cable Clamps, 6" Depth (for ITA p/n 410104331)This aluminum enclosure is for use with G6 ITA Part # 410104331, which does not include the standard removable backshell/housing. The cable clamps are 1" diameter. ITA strain relief is not needed.
-
product
Enclosure, G6, Hinged Cover, 4" Depth, No Cable Exits (for ITA p/n 410104331)
410112401
Enclosure, G6, Hinged Cover, 4" Depth, No Cable Exits (for ITA p/n 410104331)This aluminum enclosure is for use with G6 ITA Part # 410104331, which does not include the standard removable backshell/housing.No cable exits make it ideal for self-test applications.
-
product
Receiver, G6, 6 Module, Keying Feature, includes Micro Switch
310104336
Receiver, G6, 6 Module, Keying Feature, includes Micro Switch
-
product
Receiver, G6, 6 Module, EMI
310104344
The G6 Receiver includes a keying feature, locking handle and nickel-plated steel slides that engage up to 1,440 signal contacts in a 6-module configuration- all in a compact and rugged design.This G6 model also includes EMI gasketing for EMI protection.
-
product
Receiver Kit, G6 Receivers X 2 , Mounted on Slide Mount Panel (slide kit required)
310104419
This receiver kit contains (2) G6 Receivers mounted on a special slide mounting panel for easy access to wiring and instrumentation. Each G6 is configured for 6 modules. Panel requires a slide kit for proper rack mounting which is not included and must be purchased separately. *Please note: Consult procedure sheet/user manual for information regarding slight slide mechanism bracket protrusion downward into next U height on test rack on both sides of receiver.
-
product
ITA, G6, 6 Module, With Protective Cover
410104273
This G6 ITA is equipped with a removable EMI-shielded backshell. This backshell slides up to provide access to wires and connectors. This ITA also includes a keying feature. Removable and adjustable U-shaped cable clamps are attached by screws to the ITA frame and allow ITA modules to be pre-wired before assembly. The clamps can hold cable bundles with an oblong bushing effective diameter of 1.59". ITA strain relief plates are not needed.
-
product
ITA, G6, 6 Module, EMI
410104288
This G6 ITA is equipped with a removable EMI-shielded backshell which slides up to provide access to wires and connectors. This ITA also includes a keying feature and has 2 cable bundle exits with a diameter of 1.38" each and provides EMI protection.
-
product
ITA, G6, 6 Module
410104331
This G6 ITA Frame does not include standard removable housing/backshell, allowing for use of an existing enclosure or custom enclosure or fixture. May be used with VPC standard enclosures p/n 410112237 or 410112401.Not compatible with removable G6 backshell. Uses VPC 90 Series modules.
-
product
ITA, G6, 6 Module, Oversized Backshell
410104732
This oversized backshell for the G6 ITA features an adjustable cable exit that can accommodate cable bundles up to 2.50". To accommodate cable exit size variations, excess shield material may be snapped off via a perforated design.This backshell also allows for an increased bend radius which is necessary for many wiring configurations including high speed due to larger wire sizes.Compatible with p/n's 310104318, 310104336, and 310104344 and the G6 ITA is backwards compatible with the G6X Receiver (310104481).
-
product
Threaded Coupling Adapter, G2, G6, G10, ITA, For Conduit Harnessing Assemblies/Clamps
410112599
The Adapter is designed to accommodate military and commercial circular backshells for conduit or strain relief when designing for general and heavy-duty applications. The male thread size is 1.625-18 for this application.
-
product
Alignment Pin Replacement Kit, G2/G6/G10, Receiver
310118000
This kit contains parts/ tools needed to replace missing or damaged alignment/ dowel pins on the G2, G6, or G10 receiver: 2 alignment/ dowel pins Loctite primer Loctite adhesive Dimension blockInstructions for replacement can be found in G2/G6/G10 user manual.
-
product
Vertical Hinged Mounting Frame, 5U, Blank
310113358
This blank 5U Vertical Hinged Mounting Frame allows the user to configure what receivers they would like to use. Fits on a 19" rack system.
-
product
Enclosure, G6, Hinged Cover, 4" Depth, No Cable Exits (for ITA p/n 410104331)
410112401
Enclosure, G6, Hinged Cover, 4" Depth, No Cable Exits (for ITA p/n 410104331)This aluminum enclosure is for use with G6 ITA Part # 410104331, which does not include the standard removable backshell/housing.No cable exits make it ideal for self-test applications.
-
product
Enclosure, G6, 2 Cable Clamps, 6" Depth (for ITA p/n 410104331)
410112237
Enclosure, G6, 2 Cable Clamps, 6" Depth (for ITA p/n 410104331)This aluminum enclosure is for use with G6 ITA Part # 410104331, which does not include the standard removable backshell/housing. The cable clamps are 1" diameter. ITA strain relief is not needed.
-
-
product
Chassis Mount Kit for Pickering 40-908, 40-914, 40-918
310113371
The Chassis Mount Kit allows you to mount the Vertical Hinged Mounting Frame to a chassis. The row of mounting holes allow for adjustability.
-
product
Chassis Mount Kit For NI Chassis (PXI-1044/1045/1065/1085, PXIe-1065/1075 And PXIe-1095)
310113417
Allows for mounting 5U Vertical Hinged Mounting Frames to the chassis with 5 different depth settings.
-
product
Chassis Mount Kit For Agilent M9018A Chassis
310113589
Chassis Mount Kit for Agilent M9018A Chassis
-
product
SIM, Module, Receiver, 90 Series, Fully Loaded with pairs of VTAC Standard Pass-Thru and Right Angle Inserts (610151106)
510170102
This fully loaded SIM module kit comes with 34 pairs of VTAC Standard Pass-Thru and Right Angle Inserts (610151106). This kit also includes two PCB brackets for securing module to PCB.
-
product
SIM, Module, ITA, 90 Series, Fully Loaded with pairs of VTAC Standard Pass-Thru and Right Angle Inserts (610151106)
510171102
This fully loaded SIM module kit comes with 34 pairs of VTAC Standard Pass-Thru and Right Angle Inserts (610151106). This kit also includes two PCB brackets for securing module to PCB.
-
-
product
Strain Relief Plate, ITA, 90 Series
510109296
ITA Strain Relief Plate works with all ITA modules. Plate is not needed for ITAs with cable clamps.
-
product
Strain Relief Plate, Receiver, 90 Series
510109298
Strain Relief Plate works with all 90 Series receiver modules.
