Amplifiers
Instead of cascading a set of narrowband amps, use a single amplifier from Keysight and enjoy ultrabroad bandwidths - like 0.01 to 26.5 GHz, 0.045 to 50 GHz, and ranges in between. But the best thing about Keysight broadband amplifiers is what they eliminate and reduce: noise, crossover networks, and multiple power supplies.
- Accessories
- Amplifiers
- Adapters and Connectors
- Attenuators
- Bias Networks
- Cables, Cable Assemblies, and Leads
- Calibration Modules and Kits
- Chassis and Controllers Accessories
- Comb Generators
- DC Blocks
- Detectors
- Directional Couplers & Bridges
- Frequency Meters
- Smart Harmonic Mixers
- Interface Cards, Cables, and Modules
- Interposers
- mmWave and Microwave GaAs Frequency Dividers and Prescalers
- Power Dividers & Splitters
- Power Limiters
- Probes and Probe Accessories
- Racks, Rackmount Kits, and Rack Accessories
- Switches
- Test Fixtures & Test Sets
- Transition Time Converters
- Cable Assemblies
- Terminations (Loads)
- Thermocouple Kit
- Resistivity Cell For N1413 (50 Mm Electrodes)
- Resistivity Cell For N1413 (26/50 Mm Electrodes)
- Resistivity Cell For N1413 With B2980 Series (26/50/76 Mm Diameter Electrodes)
- Lithium-Ion Battery Pack, B2983 / B2987
- Extreme Temperature Active Probe, 1.5 GHz
- Accessories For RF And Microwave Handheld Analyzers
- Thermocouple (K-Type) And Temperature Probe Adapter
- Test Probe Leads, With 19-mm Tips And 4-mm Tips
- Alligator Clips
- Air Temperature Probe
- Immersion Temperature Probe
- Industrial Surface Temperature Probe
- Temperature Probe Adapter
- Soft Carrying Case, 4-5/7 In. D, Black
- Temperature Module
- Handheld Digital Multimeter, Soft Carrying Case
- IR Connectivity Bracket For U1240 Series Handheld Digital Multimeters
- Accessories For DCA Oscilloscopes Family
- 2U Dual Flange Kit
- RF Electronic Calibration Module (ECal), DC To 13.5 GHz, 4-ports
- RF Electronic Calibration Module (ECal), DC/300 KHz To 9 GHz, Type-N, 2 Port
- Thermistor Kit
- Terminal Blocks
- Economy Mechanical Calibration Kit, DC To 3 GHz, Type-F, 75 Ohm
- Spring Clip Fixture
- 110 GHz Frequency Extender
- 110 GHz Frequency Extender
- 110 GHz Frequency Extender, Pulsed DC Bias
- 110 GHz Frequency Extender, Pulsed DC Bias
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 30 A Current Shunt
-
product
Isolated Amplifier - 2 Channel, 50 Vpp
33502A
The Keysight 33502A is a dual-channel, high voltage output amplifier. It has an isolated analog front end with up to 50 Vpp (25 V) output voltage range. It is also a very low-distortion amplifier with < 0.01% @ 10 kHz and 40 Vpp. The 33502A is designed to work as a companion for function generators to offer low-distortion, higher voltage outputs.
-
product
Microwave System Amplifier, 0.5 to 26.5 GHz
83017A
The Keysight 83017A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 500 MHz to 26.5 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies.
-
product
Microwave System Amplifier, 10 MHz to 26.5 GHz
83006A
The Keysight 83006A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 10 MHz to 26.5 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies.
-
product
Microwave System Amplifier, 45 MHz to 50 GHz
83051A
The Keysight 83051A microwave system amplifier is a compact, off-the-shelf amplifier designed for systems designers and integrators. This amplifier provides power where you need it to recover system losses and to boost available power in RF and microwave ATE systems. The ultrabroad bandwidth from 45 MHz to 50 GHz allows the designer to replace several narrow bandwidth amplifiers with a single Keysight amplifier, eliminating the need for crossover networks or multiple bias supplies.
-
product
Preamplifier, 10 MHz to 4 GHz
87405B
Preamplifiers and System Noise Figure Application Note This note discusses noise figure basics including applications and characteristics of Keysight simplifier technology. Highlighted are Keysight's 87405C portable preamplifiers that provide an exceptional gain of 25 dB up to 18 GHz and a probe-power bias connection which eliminates the need for an additional DC power supply. Read the Preamplifiers and System Noise Figure Application Note now!
-
product
Preamplifier, 100 MHz to 18 GHz
87405C
Exceptional gain (25 dB) and flatness (1.5 dB) combined with a probe-power bias connection which eliminates the need for an additional DC power supply, makes these preamplifiers the ideal choice for spectrum analyzer or stand alone applications.
-
product
System Amplifiers
N4985A
The Keysight Technologies N4985A series system amplifiers are high performance broadband amplifiers with excellent power and gain from 100 kHz to 50 GHz. The amplifiers are self-contained and plug into standard AC power sources.
-
product
USB Preamplifier, 10 MHz to 4 GHz
U7227A
The U7227A, 10 MHz to 4 GHz USB preamplifier is designed to bring reliable gain and low noise figure to measurement systems improving the overall system performance and reduce systematic errors; a total solution to the X-Series signal analyzers to perform noise figure measurements.
-
product
USB Preamplifier, 100 MHz to 26.5 GHz
U7227C
The U7227C, 100 MHz to 26.5 GHz USB preamplifier is designed to bring reliable gain and low noise figure to measurement systems improving the overall system performance and reduce systematic errors; a total solution to the X-Series signal analyzers to perform noise figure measurement
-
product
USB Preamplifier, 2 to 50 GHz
U7227F
The U7227F, 2 to 50 GHz USB preamplifier is designed to bring reliable gain and low noise figure to measurement systems improving the overall system performance and reduce systematic errors; a total solution to the X-Series signal analyzers to perform noise figure measurement
-
product
Microwave System Amplifier, 2 GHz To 8 GHz
87415A
The Keysight 87415A microwave component amplifier brings compact, reliable gain block performance to systems integrators and microwave designers. With 25 dB minimum gain and over 23 dBm output power from 2 to 8 GHz, this amplifier offers output power where it is needed: at the test port.
