Power Dividers & Splitters
Keysight dividers and splitters are used in a wide range of applications, such as: transmission line fault testing, power combining, source leveling, ratio measurements, power splitting, and critical signal processing applications that require minimal insertion loss and high port isolation.
- Accessories
- Power Dividers & Splitters
- Adapters and Connectors
- Amplifiers
- Attenuators
- Bias Networks
- Cables, Cable Assemblies, and Leads
- Calibration Modules and Kits
- Chassis and Controllers Accessories
- Comb Generators
- DC Blocks
- Detectors
- Directional Couplers & Bridges
- Frequency Meters
- Smart Harmonic Mixers
- Interface Cards, Cables, and Modules
- Interposers
- Power Limiters
- Probes and Probe Accessories
- Racks, Rackmount Kits, and Rack Accessories
- Switches
- Test Fixtures & Test Sets
- Transition Time Converters
- Cable Assemblies
- Terminations (Loads)
- Thermocouple Kit
- Resistivity Cell For N1413 (50 Mm Electrodes)
- Resistivity Cell For N1413 (26/50 Mm Electrodes)
- Resistivity Cell For N1413 With B2980 Series (26/50/76 Mm Diameter Electrodes)
- Lithium-Ion Battery Pack, B2983 / B2987
- Extreme Temperature Active Probe, 1.5 GHz
- Accessories For RF And Microwave Handheld Analyzers
- Thermocouple (K-Type) And Temperature Probe Adapter
- Test Probe Leads, With 19-mm Tips And 4-mm Tips
- Alligator Clips
- Air Temperature Probe
- Immersion Temperature Probe
- Industrial Surface Temperature Probe
- Temperature Probe Adapter
- Soft Carrying Case, 4-5/7 In. D, Black
- Temperature Module
- Handheld Digital Multimeter, Soft Carrying Case
- IR Connectivity Bracket For U1240 Series Handheld Digital Multimeters
- Accessories For DCA Oscilloscopes Family
- 2U Dual Flange Kit
- RF Electronic Calibration Module (ECal), DC To 13.5 GHz, 4-ports
- RF Electronic Calibration Module (ECal), DC/300 KHz To 9 GHz, Type-N, 2 Port
- Thermistor Kit
- Terminal Blocks
- Economy Mechanical Calibration Kit, DC To 3 GHz, Type-F, 75 Ohm
- Spring Clip Fixture
- 110 GHz Frequency Extender
- 110 GHz Frequency Extender
- 110 GHz Frequency Extender, Pulsed DC Bias
- 110 GHz Frequency Extender, Pulsed DC Bias
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 120 GHz Frequency Extender
- 30 A Current Shunt
-
product
Power Splitter, DC to 18 GHz
11667A
The Keysight 11667A power splitter is recommended when making wideband ratio measurements using a Keysight 8757 scalar network analyzer. This two-resistor type power splitter provides excellent output SWR at the auxilliary arm when used for source leveling or ratio measurement applications. The tracking between output arms over a frequency range from dc to 18 GHz allows wideband measurements to be made with a minimum of uncertainty.
-
product
DC to 2 GHz Power Splitter with BNC connector
11667L
The Keysight 11667L is a 50 ohm two-resistor type power splitter with BNC connectors. It is used with the E5061B network analyzer for power distribution network applications, such as DC-DC converter output impedance measurements with shunt-thru method (100 Hz to 10 MHz). It provides excellent amplitude (<0.2 dB) and phase tracking (+/-3), ensures highly accurate power splitting and low SWR minimizes measurement uncertainty.
-
product
Hybrid Power Divider, 0.5 GHz to 26.5 GHz
87302C
The Keysight 87302C hybrid power divider is designed for power splitting applications that require minimal insertion loss and high isolation between ports. It has insertion loss between the main line and output port which is 1 to 2 dB less than equivalent resistive power splitters. It is designed for critical signal processing applications; phase and amplitude tracking between the two output ports is controlled and specified.
-
product
Hybrid Power Divider, 1 GHz to 26.5 GHz
87303C
The Keysight 87303C hybrid power divider is designed for power splitting applications that require minimal insertion loss and high isolation between ports. It has insertion loss between the main line and output port which is 1 to 2 dB less than equivalent resistive power splitters. It is designed for critical signal processing applications; phase and amplitude tracking between the two output ports is controlled and specified.
-
product
Hybrid Power Divider, 2 GHz to 26.5 GHz
87304C
The Keysight 87304C hybrid power divider is designed for power splitting applications that require minimal insertion loss and high isolation between ports. It has insertion loss between the main line and output port which is 1 to 2 dB less than equivalent resistive power splitters. It is designed for critical signal processing applications; phase and amplitude tracking between the two output ports is controlled and specified.
-
product
Power Divider, DC to 18 GHz
11636A
The Keysight 11636A is a dc to 18 GHz power divider for direct power dividing applications. The excellent impedance match of all three ports improves fault location measurements by reducing re-reflections. The Keysight 11636A power divider/combiner is recommended when making wideband comparison measurements with a Keysight 8757 scalar vector network analyzer.
-
product
Power Divider, DC to 26.5 GHz
11636B
The Keysight 11636B is a dc to 26.5 GHz power divider for direct power dividing applications. The excellent impedance match of all three ports improves fault location measurements by reducing re-reflections. The Keysight 11636B power divider/combiner is recommended when making wideband comparison measurements with the Keysight 8757 scalar vector network analyzer.
-
product
Power Divider, DC to 50 GHz
11636C
The Keysight 11636C is a DC to 50 GHz power divider that provides highly accurate direct power dividing and combining. Excellent phase and amplitude tracking ensure accurate impedance matching of all three ports, which improves the fault location measurement by reducing re-reflections and intermodulation distortion.
-
product
Power Splitter, DC to 26.5 GHz
11667B
The Keysight 11667B power splitter is recommended when making wideband ratio measurements using a Keysight 8757 scalar network analyzer. This two-resistor type power splitter provides excellent output SWR at the auxilliary arm when used for source leveling or ratio measurement applications. The tracking between output arms over a frequency range from dc to 26.5 GHz allows wideband measurements to be made with a minimum of uncertainty.
-
product
Power Splitter, DC to 50 GHz
11667C
The Keysight 11667C power splitter is recommended when making wideband ratio measurements using a Keysight 8757 scalar network analyzer. This two-resistor type power splitter provides excellent output SWR at the auxiliary arm when used for source leveling or ratio measurement applications. The tracking between output arms over a frequency range from dc to 50 GHz allows wideband measurements to be made with a minimum of uncertainty.
