Ethernet Switches
-
product
Ethernet Switches
Choose Omega's industrial-grade Ethernet switches to facilitate reliable data transmission speeds. These switches can withstand extreme conditions.
-
product
Managed Ethernet Switches
CommFront offers a range of rugged, industrial-grade, managed and unmanaged Ethernet Switches. These Industrial Ethernet Switches have been designed for harsh industrial environments and withstand a wide temperature of -40°F to 185°F (-40°C to 85°C), and they come with the options of 10/100/1000M for both Fast and Gigabit Ethernet networks. In addition, our advanced, rugged, industrial-grade, Fast and Gigabit Ethernet Switches support both point-to-point and multi-drop (daisy-chain or self-healing redundant ring) fiber optic networks, which are designed to cover large areas. These industrial Ethernet Switches support up to 255 fiber nodes, and each fiber node can extend the Fast and Gigabit Ethernet data up to 100 miles or 160 km. When configured as a ring network, the built-in self-healing feature allows the Ethernet data to be transmitted clockwise or counterclockwise; therefore, failure of any individual converter will not affect other devices located on the same ring, making the entire Ethernet network more robust and reliable.
-
product
Industrial Ethernet Switches
Rugged network devices built to operate reliably in harsh factory environments (extreme temps, shock, vibration) by connecting machinery like sensors, cameras, and PLCs, providing robust, high-speed data transfer.
-
product
10-Port Layer 2 Managed/Unmanaged Ethernet Switches
TEN710MW
*EN 50155 layer 2 managed Ethernet switch*Power boost for PoE+, max. budget 150W*Wide operating temperature range from -40°C to 75°C*Supports ERPS/QoS/LACP and more network control, and security features*Reliable IP54 & 5 years warranty
-
product
Ethernet Switches
RES3000
The 12-port RES3000 is just 5.8" wide, 5.4" deep, 3.4" tall and weighs only 1.4Kg. The 24-port and 28-port RES3000 are the same width and depth and just 9.6" wide, weighing around 2.5Kg. That's what we call SWaP optimization.
-
product
Industrial Ethernet Embedded Switches
ADI’s portfolio of embedded Real Time Ethernet Switch are ideal solution for adding Industrial Ethernet connectivity to any field device or controller application. Designed for scalable and flexible system development, they support all major Industrial Ethernet Protocols while also providing the ability to future-proof for many Time Sensitive Networking (TSN) features, for the IEC/IEEE 60802 industrial profile. They interface easily with any host processor including any ARM® CPU utilizing the protocol specific device drivers provided by ADI. This provides the flexible system partitioning enabling the selection of processor that best fits your application requirements. It also provides the freedom to utilize any vendors protocol stack.
-
product
Ethernet Switches
Field proven and ready for service, access to real time information is critical in today's networks. Ethernet switches and Layer 3 routing engines from Elma have the successful track record in critical applications you can rely on. Whether in rugged defense applications, transportation logistics network or a telecom application, network centricity is the defacto paradigm in embedded systems, providing the speed, scalability, reliability and security necessary to get the job done.
-
product
Embedded Ethernet Switches
Designed specifically for battlefield and industrial applications, our range of switches features advanced firewalls, encryption, and hardware-assisted security.
-
product
20-port Ethernet Switch
VPX3-652
Curtiss-Wright Defense Solutions
The VPX3-652 is a fully featured Layer-2 managed Ethernet switch designed to support advanced network architectures for the defense industry.
-
product
Ethernet Switches
The switches CXR Carrier Ethernet CE 2.0 allow easy and economical transition to 10 Gigabit Ethernet class operator while providing hardened features in temperature and electromagnetic immunity.
-
product
BusTools Software Analyzer
AFDX-A
BusTools/AFDX-A is a Windows 7/10-based GUI application solution from Abaco Systems that establishes new levels of power, flexibility and ease-of-use for AFDX (Avionics Full Duplex Switched Ethernet) traffic monitoring, analysis and simulation. Available for use with our powerful CNIC interface, BusTools/AFDX offers an intuitive interface to view, log, analyze and generate AFDX network traffic at the Adapter, End System, Virtual Link (VL) and Port levels. Contact Goleta factory for listing of supported products.
-
product
IIoT Hardware
IIoT Hardware by ifm - edge controller, edge gateways, io-key, IO-link masters for factory automation, IO-Link masters for the food and beverage industry, Digital I/O modules for factory automation, digital I/O modules for the food and beverage industry, ethernet switches for factory automation, ethernet switches for the food and beverage industry, IPC appliances
-
product
Rugged Embedded Multifunction I/O System with 10 GB Fiber Optic & 1 GB Copper Ethernet Switch
NIU3E
The NIU3E is a small, rugged, low-power, self-contained multifunction I/O processing system preconfigured with 24-CH programmable Discrete I/O, 8-CH ARINC 429/575, 4-CH CANBus and 2-CH MIL-STD-1553 functions and incorporates an Ethernet switch module that offers four (4) 10GBase-SR multimode fiber optic ports and sixteen (16) 10/100/1000Base-T Ethernet ports. The NIU3E can also be configured with one smart Configurable Open Systems Architecture™ (COSA®) function module. The NIU3E boasts a Dual or Quad Core ARM A53 processor for customer application and I/O and communications management. The NIU3E is configured with two 10/100/1000Base-T (GbE) Ethernet ports and an RS-232 port for maintenance / diagnostic or configuration interface. Ideally suited for rugged Mil-Aero applications, the NIU3E delivers off-the-shelf solutions that accelerate deployment of SWaP-optimized systems in air, land and sea applications.
-
product
3U CPCI I/O & Comm Board W/Gig-E Switch
75D4-H2
The 75D4-H2 is a Layer 2+ Gigabit Ethernet Switch built upon NAI’s multifunction, 3U cPCI board technology. The 75D4 motherboard contains a high-density I/O module slot that supports an H2 switch function. The 75D4 with H2 consumes approximately 9.5 W of total power at 5 V to operate at full 1000 Base-T speeds. In addition, the 75D4 motherboard can integrate four channels of RS232/423/422/485 serial communications. This adds an additional 1.5 W of 5 V power. Serial data is available on the cPCI bus or can optionally be available over Ethernet via the use of one of the switch ports.
-
product
GPON ONT
ONT-1GE-RF-W
Hangzhou Softel Optic Co., Ltd.
ONT-1GE-RF-W is fiber to the home multi service access GPON ONT. It’s based on the mature, stable, high cost performance GPON technology and has gigabit Ethernet switching, WDM and HFC technology. ONT-1GE-RF-W has a higher bandwidth, higher reliability, easy management and good quality of service (QoS) guarantee with technical performance of equipment meet the ITU- T G. 984 requirements and have good compatibility with third party manufacturers OLT.
-
product
3U CompactPCI Serial FPGA 10-20 ports Industrial Ethernet
SY7-CYCLONE
The EKF SY7-CYCLONE is a CPCI Serial FPGA board with front panel connectors for up to 20x100Mbps SPE ports. It can be configured as Ethernet NIC, switch, router, or gateway.
-
product
cRIO-9805, 4-Port, 802.1AS Ethernet Switch Expansion Module for CompactRIO
786993-01
4-Port, 802.1AS Ethernet Switch Expansion Module for CompactRIO - The cRIO-9805 is a 4-port Ethernet switch that provides additional ports with 802.1AS network synchronization capability over the 1000 Base-TX network interface. This module supports TCP/IP and UDP network protocols in DHCP + link-local, DHCP, static, and link-local network IP configurations. The cRIO-9805 auto-negotiates communication rates of 10, 100, or 1000 Mbps with its four internally switched ports.
-
product
Ethernet Switches
AvaLAN has released a line of switches that will put your network setup ahead of the curve and power all the necessary devices.
-
product
LAN Switches
Featuring user-friendly efficient IP management, IPv4 and IPv6 hardware Layer 3 routing, PLANET LAN switches are designed for SMBs, system integrators and large enterprises when managing wide coverage networks. Apart from providing 10Gbps~100Gbps high performance managed switches, PLANET Ethernet switches, which come with unique Color LCD Touch Screens for efficient management purposes, are also designed with user-friendly fast installation and real-time monitoring.
-
product
3U VPX 1/10/40 Gigabit Ethernet Switch
ComEth4081e
Powered by a Marvell highly integrated System-on-a-Chip (SoC) with programmable packet processors, and controlled by Switchware, the field-proven Interface Concept network management application, the ComEth4080e offers a high density of 1GbE/10GbE and 40GbE ports on a 3U footprint.
-
product
Ethernet Media Switch
Ethernet media switch is a layer 2 switch running on Ethernet or Fast Ethernet. It equips with one or two fiber ports and four copper UTP ports and hence acts as easy-to-use add-drop equipment for connecting network devices into optical fiber network. Ethernet media switch meets corresponding IEEE 802.3 standards.
-
product
3U OpenVPX/SOSA 40 GbE Switch
ComEth4590a
The ComEth 4590a is a SOSA aligned high-performance layer 3 switch with 2 Ethernet switch matrices for highly secure network communications. In 10GbE and 40GbE Ethernet copper and fiber configurations.
-
product
Gigabit Ethernet Switch
VME-690
Curtiss-Wright Defense Solutions
The VME-690 from Curtiss-Wright is a fully-featured Gigabit Ethernet Switch designed to provide a complete networking solution for VME systems.
-
product
Ethernet Switch & Secure Router
VPX3-685
Curtiss-Wright Defense Solutions
The VPX3-685 is a fully-featured Layer-2/Layer-3 managed Ethernet router with a highly integrated security subsystem. Enabling the vision of Network Centric connectivity, the VPX3-685 Secure Ethernet Network Router provides an accelerated path to secure network-ready architectures that can interoperate seamlessly within the Global Information Grid (GIG).
-
product
Networking
esd is a supplier of networking products for Ethernet-based fieldbus systems. These include network switches and industrial Gigabit Ethernet switches with integrated COM server. All modules are suitable for DIN rail mounting.
-
product
Software-Defined Networking
Schweitzer Engineering Laboratories, Inc.
SEL SDN is an Ethernet switch solution optimized for operational technology (OT) LANs.
-
product
Switch & Router Modules
Curtiss-Wright Defense Solutions
Our highly engineered networking cards provide systems integrators with a fast and powerful way to interconnect chassis, cards, and CPUs through switched Gigabit, 10 Gigabit, and 40 Gigabit Ethernet. Operating at wire-speed, Ethernet switching and routing can be used to architect the infrastructure for unified (Ethernet only) or hybrid (Ethernet control and other switched data-plane fabric) networks for transferring IP-based control and data packets within advanced military systems.
-
product
3U OpenVPX Sensor Interface Unit - SIU36
SIU36
The SIU36 is a highly configurable rugged system or subsystem ideally suited to support a multitude of Mil-Aero applications that require high-density I/O, communications, Ethernet switching and processing. The SIU36 leverages NAI’s 3U boards to deliver off-the-shelf solutions that accelerate deployment of SWaP-optimized systems in air, land and sea applications.
-
product
Ethernet Switch and Router
VPX6-684
Curtiss-Wright Defense Solutions
Curtiss-Wright's VPX6-684 FireBlade provides Systems Integrators with a fast, secure and unified approach to interconnect subsystems, chassis, cards, and compute nodes within any given platform using 1 or 10 Gigabit Ethernet links. Providing up to 24 wirespeed 10/100/1000 Mbps interfaces and up to four 10 Gbps interfaces in a single 6U VPX slot, the VPX6-684 Ethernet Switch is ideal for architecting system-wide Intra-Platform Networks (IPNs).
-
product
3U cPCI Sensor Interface Unit
SIU33
NAI's SIU33 is a highly configurable rugged COTS system or subsystem ideally suited for rugged military, industrial, and commercial applications that require high-density I/O, communications, Ethernet switching, and processing. The SIU33 uses up three NAI field-proven, 3U cPCI boards to deliver off-the-shelf, SWaP-optimized COTS solutions that "Accelerate Your-Time-to-Mission."
